which cold air intake should i get?? INJEN,K&N or Fujita?
dude, its the FIRST damn sticky in this section, try checking it out before you make intake thread number 143726158
https://www.cobaltss.net/forums/2-0l-lsj-performance-tech-47/ss-sc-intakes-15911/
https://www.cobaltss.net/forums/2-0l-lsj-performance-tech-47/ss-sc-intakes-15911/
Injen IMO
get a hydro sheild also, as it will help keep the filter cleaner also 
We have them @ www.TurboTechRacing.com and in stock
get a hydro sheild also, as it will help keep the filter cleaner also 
We have them @ www.TurboTechRacing.com and in stock
well I got the fujita f5 off ebay for $79.00+shipping and came with the duffle bag,hat and stickers! took about three hours to install but fyi after carefully adjustment it still pushed the fender liner out to the point to where it can rub on the tire.I think i can fix it it by putting a wire tye or something to pull the inside of the liner away from the tire (still to be done)btw It would have taken alot less time if the hose clamps they provided were about 1/4 inch longer as they were a pita . also I finaly skipped their directions and assembled the lower sections together and carefully fed them up from below.Where the pipe goes through the chassis hole i took some windshield washer hose and cut a slit in and put over the edge of the metal so I wouldnt scratch the tubing,same on what i would call frame bracing were the ground screw is.The filter also sets really low to the splash shield on the bottom so you kind of mount it up high on the pipe.Overall i guess its OK and its guiet till you get to about 3/4 throttle at 2500 rpm then it starts singing!This in on a 2006 btw and I think I read where there the 2007 models with abs the fujita will not fit because of the routing of the brake lines.Sorry so long but just wanted to give all the info I had with this.HTH
Last edited by rokon340; Jun 14, 2007 at 01:14 PM. Reason: stock tires btw!
well I got the fujita f5 off ebay for $79.00+shipping and came with the duffle bag,hat and stickers! took about three hours to install but fyi after carefully adjustment it still pushed the fender liner out to the point to where it can rub on the tire.I think i can fix it it by putting a wire tye or something to pull the inside of the liner away from the tire (still to be done)btw It would have taken alot less time if the hose clamps they provided were about 1/4 inch longer as they were a pita . also I finaly skipped their directions and assembled the lower sections together and carefully fed them up from below.Where the pipe goes through the chassis hole i took some windshield washer hose and cut a slit in and put over the edge of the metal so I wouldnt scratch the tubing,same on what i would call frame bracing were the ground screw is.The filter also sets really low to the splash shield on the bottom so you kind of mount it up high on the pipe.Overall i guess its OK and its guiet till you get to about 3/4 throttle at 2500 rpm then it starts singing!This in on a 2006 btw and I think I read where there the 2007 models with abs the fujita will not fit because of the routing of the brake lines.Sorry so long but just wanted to give all the info I had with this.HTH
I have a K&N typhoon, with an AEM dryflow filter.
Im very happy with it. K&N has great fitament, absolutely NO issues, unlike almost every other intake....
It comes with a Hydroshield, great piece of mind.
and with the Dryflow element on it, you avoid the risk of throwing cels due to filter oil contamination on your MAF sensor.
Just my biased opinion
Im very happy with it. K&N has great fitament, absolutely NO issues, unlike almost every other intake....
It comes with a Hydroshield, great piece of mind.
and with the Dryflow element on it, you avoid the risk of throwing cels due to filter oil contamination on your MAF sensor.
Just my biased opinion
i used to have an aem and i hated that thing, whenever the dealer would work on it they would knock it off not even knowing it was down there, so i spent some money on the injen intake and it was easy to install, looks great, and added a little responsiveness to the car.
I can tell you not to get the eBay intake unless you can retune your car. It makes it scream, but makes you throw codes probably worse than any of the other intakes. I like them all, but I think as much of a PITA the Fujita 3" intake is, it really does make the car scream in 2 different places. You hear it from the Air filter AND the supercharger.
dude, its the FIRST damn sticky in this section, try checking it out before you make intake thread number 143726158
https://www.cobaltss.net/forums/showthread.php?t=15911
https://www.cobaltss.net/forums/showthread.php?t=15911
if you don't want anyone to know you have a CAI, AEM is a good one. you cant tell its there. and its never given me a CEL
Thread
Thread Starter
Forum
Replies
Last Post
z28addiction
Wanted - What to buy - All categories
0
Sep 28, 2015 12:03 AM
OrangeCoba
Problems/Service/Maintenance
0
Sep 25, 2015 06:06 PM




