|
View Full Version : SS/SC on the bottle, where do you spray?? ItalianJoe1 07-05-2007, 12:55 AM As the title states, if you are spraying your 2.0 SS, where are you putting the nozzle? I have to make a spacer plate or something this week, either one for the TB, under the SC, something. Just wondering where people are putting thiers. I think it would be better to spray after the blower for max cooling, but that is also the biggest pain in the ass due to needing a second gasket ($30) and a spacer for the bypass. Thanks for your help! Joe lsjwannabe 07-05-2007, 01:03 AM spraying before would cool the blower down spraying after would give you a cooler intake charge. most common is the tb spacer or the s/c spacer RBC 07-05-2007, 01:04 AM Don't hold this as fact but I believe after the blower is better do to the fact that if you spray before the blower it will eat a coating off of the rotor. I believe I read something about this but I don't know from first hand experience. lsjwannabe 07-05-2007, 01:06 AM thats more along the lines of meth and that has not been confirmed on our blowers as far as i know sunfirejoe 07-05-2007, 01:15 AM i used a spacer ItalianJoe1 07-05-2007, 01:35 AM i used a spacer Where? thats the question I have. Behind the TB or under the blower? lsjwannabe 07-05-2007, 09:54 AM tb spacer i believe blacksssc06 07-05-2007, 10:06 AM i have my stuff before the superchager nos and meth and i have had no problems im taking the superchager off next week i well let you know about that coating ItalianJoe1 07-05-2007, 10:15 AM Cool, does anyone sell a TB spacer? I can make one, but it might be easier/cheaper to buy one. jgarciarivera 07-05-2007, 10:18 AM Cool, does anyone sell a TB spacer? I can make one, but it might be easier/cheaper to buy one. I think this is it Joe CA PHENOLIC THROTTLEBODY SPACER CA Phenolic Throttle body spacer. This spacer is made in house from 1/2" Phenolic material . This spacer will keep your throttle body isolated from heat from the supercharger. It's main purpose as intended is for a place to mount a methanol jet or nitrous jet. By placing the jets before the supercharger , it helps cool the supercharger down and still inject the fluids/ gases into the engine . Thus giving a greater benefit than just injecting them after the supercharger. Spacer comes non-tapped with no holes drilled !!! If you would like it tapped for the Snow performance methanol kit it is an additonal $10.00 fee purchased seperately!!! Comes with longer throttle body bolts , and gasket sealer. http://cobalt-addiction.com/performance.htm http://cobalt-addiction.com/products/pages/forced_images/phen1_small.jpg Jose |