Reverse lights don't work
Reverse lights don't work
My reverse lights don't work, has anyone else had this problem and how did you fix it. I've checked the bulbs and there good, and the fuse is not blown. Any help would be greatly appreciated.
well for starters...what kind of car do u drive? on my blazer i hafta jiggle the shifter to get the reverse lights to come on...but its also 16 years old...
and....dont u have a warranty...if so why not just take it to gm and make them figure it out...
and....dont u have a warranty...if so why not just take it to gm and make them figure it out...
Last edited by kingg5; Sep 17, 2007 at 08:59 PM. Reason: Automerged Doublepost
I got an 05 chevy cobalt coupe, manual tranny
My cars got 54000 miles on it, so no warranty anymore bumper to bumper at least.
My cars got 54000 miles on it, so no warranty anymore bumper to bumper at least.
Last edited by brianm01; Sep 17, 2007 at 09:02 PM. Reason: Automerged Doublepost
have u tried jiggling the shifter knob? and mabye have someone else put the car in reverse while its running then look for yourself...cuz mabye ur tryin to find out for urself if there working by putting it in reverse while its not running....
wow shitty warranty..i got 5 year or 150 000 kms on my car
wow shitty warranty..i got 5 year or 150 000 kms on my car
Last edited by kingg5; Sep 17, 2007 at 09:03 PM. Reason: Automerged Doublepost
I've tried that with no results, i'm noy sure were the reverse sensor is located, i'm thinking maybe that it may be broken or a plug came loose, the only two sensor that i've found so far are on the bell housing and the plus were tight.
The back up lamp switch on your tarnny is not on the "bell housing" it's lower near (just above) the LH axle/output shaft. It has 2 wires, pink and light green. If you find the switch you can do a bsic diagnostic. Unplug it and with the IGN SW in the RUN position, "jumper" across the 2 wires and the back up lamps should turn ON. If they DO the switch has issues, if they dont - you have other "circuit" issues.
In THAT event the next check is to confirm B+ on the pink wire with a test lamp and we can go from there...
WopOnTour
In THAT event the next check is to confirm B+ on the pink wire with a test lamp and we can go from there...
WopOnTour
Thread
Thread Starter
Forum
Replies
Last Post
royce777
Parts
27
Sep 28, 2015 07:11 AM



