Dynoed the GMS1 at Car Craft 2010 in MN
07-17-2010, 11:42 PM
#1
Senior Member
Thread Starter
Join Date: 05-05-09
Location: Minnesota
Posts: 674
Likes: 0
Received 0 Likes
on
0 Posts
Dynoed the GMS1 at Car Craft 2010 in MN
I threw my car on the dyno for the crowd to see today. Too bad i couldn't get a cooler day but i wanted to see my numbers.... I got laughed at for putting it up there, but i shut a lot of people up after the pulls.
Mods: GMS1, OTTP Catless DP, and Hahn Cool Air Intake
Pull 1 conditions: 97.00*F, 29.25 in-Hg, 27% Humidity
Pull 1 netted 276.73hp and 301.88tq
Pull 2 Conditions: 97.15*F, 29.25 in-Hg, 28% Humidity
Pull 2 netted 276.85hp and 304.32tq
Side notes: Engine was severely heat soaked due to the 4 block drive to the dyno from my parking spot and it didnt get time to cool down much, intake temps were 111*F right before the first pull, IAT2's were in the the high 90's at that time as well. I'm guessing i didnt boost to the full 22lbs because from my experience on hot days so far I've been hitting around 20lbs. I won the FWD Class for the weekend in Highest HP and tq as well.
ENJOY!!!
http://www.youtube.com/watch?v=vEZuOsqNbH4
Time for an 06Black tune now.....
-kretty
Mods: GMS1, OTTP Catless DP, and Hahn Cool Air Intake
Pull 1 conditions: 97.00*F, 29.25 in-Hg, 27% Humidity
Pull 1 netted 276.73hp and 301.88tq
Pull 2 Conditions: 97.15*F, 29.25 in-Hg, 28% Humidity
Pull 2 netted 276.85hp and 304.32tq
Side notes: Engine was severely heat soaked due to the 4 block drive to the dyno from my parking spot and it didnt get time to cool down much, intake temps were 111*F right before the first pull, IAT2's were in the the high 90's at that time as well. I'm guessing i didnt boost to the full 22lbs because from my experience on hot days so far I've been hitting around 20lbs. I won the FWD Class for the weekend in Highest HP and tq as well.
ENJOY!!!
http://www.youtube.com/watch?v=vEZuOsqNbH4
Time for an 06Black tune now.....
-kretty
07-18-2010, 12:15 AM
#4
Senior Member
Decent man .. Sounds right on the money.. I made 268 and 297 with just gms1 on a cool day so yours should be fairly accurate other than your trims 
i shut some ppl up when i did mine too the dyno operator said "here comes another 4 cylinder that wont do anything" lol i had the highest numbers that day too. .. Beat a 99 civic sir turbo that i figured would make decent power and it only pulled 193
i shut some ppl up when i did mine too the dyno operator said "here comes another 4 cylinder that wont do anything" lol i had the highest numbers that day too. .. Beat a 99 civic sir turbo that i figured would make decent power and it only pulled 193
07-18-2010, 12:20 AM
#7
Senior Member
Thread Starter
Join Date: 05-05-09
Location: Minnesota
Posts: 674
Likes: 0
Received 0 Likes
on
0 Posts
listen to the people laugh and give me ****.... Then after the pull sthey shut up and the dyno guy handed me a shirt telling me i won, it was noon, there was 6 hrs of show left.... haha
07-21-2010, 10:09 AM
#11
Senior Member
Join Date: 05-03-08
Location: Halifax Nova Scotia, Canada
Posts: 1,357
Likes: 0
Received 0 Likes
on
0 Posts
Decent man .. Sounds right on the money.. I made 268 and 297 with just gms1 on a cool day so yours should be fairly accurate other than your trims i shut some ppl up when i did mine too the dyno operator said "here comes another 4 cylinder that wont do anything" lol i had the highest numbers that day too. .. Beat a 99 civic sir turbo that i figured would make decent power and it only pulled 193
i shut some ppl up when i did mine too the dyno operator said "here comes another 4 cylinder that wont do anything" lol i had the highest numbers that day too. .. Beat a 99 civic sir turbo that i figured would make decent power and it only pulled 193
07-23-2010, 05:47 PM
#16
Senior Member
iTrader: (7)
Join Date: 04-06-10
Location: 6000ft on a Mountain in Colorado!
Posts: 3,703
Likes: 0
Received 0 Likes
on
0 Posts
Are you stock other than GMS1?
I'm starting with GMS1 so I was just curious.
****sorry, I need to learn to read apparently****
I'm starting with GMS1 so I was just curious.
****sorry, I need to learn to read apparently****
Last edited by vahdyx; 07-23-2010 at 07:22 PM.
07-31-2010, 03:15 PM
#18
New Member
Join Date: 04-08-09
Location: Miami
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Hey wuz up guys i dyno my car today i have the same thing as kretty gms1 hahn dp and clear image intake
3 gear 287.69 hp 283.32 trq run conditions 96.35F 29.75 in Hg Humidity 33% STD 1.04
4 gear 287.87 hp 316.79 trq run conditions 97.03F 29.75 in Hg Humidity 33% STD 1.04
dyno sheet will come soon i don't have a scaner im postin it tho at a friends house soon
3 gear 287.69 hp 283.32 trq run conditions 96.35F 29.75 in Hg Humidity 33% STD 1.04
4 gear 287.87 hp 316.79 trq run conditions 97.03F 29.75 in Hg Humidity 33% STD 1.04
dyno sheet will come soon i don't have a scaner im postin it tho at a friends house soon
Thread
Thread Starter
Forum
Replies
Last Post