So I have a cel on and its p0101. I'm guessing its my intercooler pipe since I couldn't boost. Would I be right

 

That's a MAF sensor code (on your intake).

 

Would that case you to get zero boost

 

check your charge pipes, you probably have a leak. I thrown a p0101 when my Injen blowed off a couple of times when I first installed it, until I finally gotten t-bolt clamps. are you tuned with your setup?

 

yea im tuned. it was the intercooler piping. all that plastic under the hood is not good. what were they thinking

 

What was it with the intercooler piping?

 

I thought it was. When I installed the pipe I could hit full boost.
I let the car sit for a hour started it up no cel, no I'm still can't hit boost. At first I could now I can't.
When I try to it stays at about 8 vacuum.
Also it sounds like a supercharger instaed of a turbo. When I try to punch it there's a whinning sound coming from under the hood

 

I thought it was. When I installed the pipe I could hit full boost.
I let the car sit for a hour started it up no cel, no I'm still can't hit boost. At first I could now I can't.
When I try to it stays at about 8 vacuum.
Also it sounds like a supercharger instaed of a turbo. When I try to punch it there's a whinning sound coming from under the hood

Now the damn cel light just came back on. Damn it

 

found out its a leak. i shoulda bought the upgrade sleeves. dumb me huh