Kmo43 2016
#901
Senior Member
Thread Starter
#902
Senior Member
Thread Starter
Got my old engine all apart going to be cleaning parts for the next while. Let me know if there's something you wanna see a pic of.
#903
Senior Member
Thread Starter
It looks like my rods are a tiny bit bent
#905
Senior Member
Thread Starter
#906
Senior Member
Thread Starter
#909
Senior Member
Thread Starter
#910
Senior Member
Thread Starter
I'll be taking my engine in to the machine shop sat to get it all checked out then I can throw her all together finally
#912
Senior Member
Thread Starter
#914
Senior Member
Thread Starter
#916
Senior Member
Thread Starter
I will be using another set of R compounds don't know exactly which NT01s are expensive here
#917
Senior Member
Thread Starter
I cleaned up some stuff to make it pretty again
Cleaned up the arms and took out all the bushings. I knocked the T cabs out with a hammer and cut the spherical cabs out
Cleaned the arm out with my die grinder and a 60 grit roll then tapped in with the same hammer I knocked it out with
After a couple taps with a hammer my cab fell apart
More to come this weekend
Cleaned up the arms and took out all the bushings. I knocked the T cabs out with a hammer and cut the spherical cabs out
Cleaned the arm out with my die grinder and a 60 grit roll then tapped in with the same hammer I knocked it out with
After a couple taps with a hammer my cab fell apart
More to come this weekend
#919
Senior Member
Thread Starter
#921
Senior Member
Thread Starter
#922
Senior Member
Thread Starter
I'm at the machine shop right now waiting for them to open so I can get my engine check and possibly balanced
#923
Senior Member
Thread Starter
Engine dropped off this thing is gonna be such a nice unit when it's all together!!
#924
Senior Member
Thread Starter
#925
Senior Member
Thread Starter