2.79 pulley only 16psi help
i have a 2.79 pulley and i only hit max 16 psi i have a header and high flow cat and all the other modds in my sig but why am i only hitting 16psi anything would be help full meth is not hooked up
whats your altitude?
no 2.7's get that... not 2.8's
you have full exhuast thats a loss of 1 psi right there plus altitude... stop worrying your cars fine
no 2.7's get that... not 2.8's
you have full exhuast thats a loss of 1 psi right there plus altitude... stop worrying your cars fine
Last edited by hungryhip-ccp; Jul 27, 2008 at 07:03 PM. Reason: Automerged Doublepost
they probably just have restrictions to flow causing higher boost.
having good exhaust work will drop your boost, and make more power with it.
which is a GOOD thing. not a bad thing.
so exhaust and altitude your losing approx 1.5psi.... nothing to worry about your cars proly pretty fast, just not as fast as mine lol just f-in with ya
heres an example im at 2200ft with full 3" catless exhaust and 2.7 and i see a max of 17 but normally 16-16.5
heres an example im at 2200ft with full 3" catless exhaust and 2.7 and i see a max of 17 but normally 16-16.5
Last edited by hungryhip-ccp; Jul 27, 2008 at 07:07 PM. Reason: Automerged Doublepost
and ive ran a lowest of 13.2 so boost doesent equall power my friend... moving air does...
i added a example to my post ^^^ look above
i added a example to my post ^^^ look above
Last edited by hungryhip-ccp; Jul 27, 2008 at 07:09 PM. Reason: Automerged Doublepost
...this makes me wonder wtf is with mine,lol, I'm from canada so it reads in kpa, but I'm reading 105-110kpa, which is about 15.5lbs of boost, on just a stage 2 pulley. I'm a sea level though, maybe 30ft elevation,lol (this is in Moncton, New Brunswick) I'm not complaining,lol, I'm just wondering how thats possible if another guy is running 16psi on a 2.79 when stage 2 is what 3.09? Does that mean my gauge is very innacurate beacuse its the stock one? (local guy tried to tell me stock one is ****, I told him I didnt know if it was or wasnt so i wasnt gonna argue)
...this makes me wonder wtf is with mine,lol, I'm from canada so it reads in kpa, but I'm reading 105-110kpa, which is about 15.5lbs of boost, on just a stage 2 pulley. I'm a sea level though, maybe 30ft elevation,lol (this is in Moncton, New Brunswick) I'm not complaining,lol, I'm just wondering how thats possible if another guy is running 16psi on a 2.79 when stage 2 is what 3.09? Does that mean my gauge is very innacurate beacuse its the stock one? (local guy tried to tell me stock one is ****, I told him I didnt know if it was or wasnt so i wasnt gonna argue)
well i see 16 on 2.7 at 2200ft and at my girls house where it sea level i see 18.5 almost 19 so ide say the altutude makes a huge difference in boost and power...
Thread
Thread Starter
Forum
Replies
Last Post
patooyee
Wanted - What to buy - All categories
0
Oct 1, 2015 01:07 PM



