2.0L LSJ Performance Tech 205hp Supercharged SS tuner version. 200 lb-ft of torque.

Cry02...get cooler air intake

Thread Tools
 
Search this Thread
 
Old Jun 20, 2006 | 06:39 PM
  #26  
juststickit124's Avatar
Thread Starter
Senior Member
 
Joined: 03-09-06
Posts: 2,425
Likes: 0
From: "The Valley"-California
Originally Posted by SRT-4_UK
The water meth will help in any situation whether you have huge hp or not. Water meth is not harmful at all. It also richens the car a little bit not leans it out. Running a lower thermostat will lower the engine temp but put more stress on it over time.
it's a mixture in a bottle like the liquid nitro? So would it have to be refilled or is it some type of home made mixture? I'm really curious to set something up now.
Reply
Old Jun 20, 2006 | 06:41 PM
  #27  
SRT-4_UK's Avatar
New Member
 
Joined: 04-20-06
Posts: 82
Likes: 0
From: RAF Mildenhall, England
Originally Posted by juststickit124
after reading that article is seems detonation is what happened to my friends STI sunday. He has crazy stage V tuning and only a CAI and exhuast. Stock intercooler, IC hoses, and thermostat. Anyways, we were driving through the canyons and his car just siezed up. We checked the oil and it was bone dry and steaming. Not exactly sure what happened but Subie is making him pay 6,800 for a new engine.
That actually sounds like a seal went bad and he lost oil somewhere. Detonation is having to much air and not enough fuel. If he had the stage 5 tuning and no fuel upgrades then detonation is a major issue.
Reply
Old Jun 20, 2006 | 06:43 PM
  #28  
SRT-4_UK's Avatar
New Member
 
Joined: 04-20-06
Posts: 82
Likes: 0
From: RAF Mildenhall, England
Originally Posted by juststickit124
it's a mixture in a bottle like the liquid nitro? So would it have to be refilled or is it some type of home made mixture? I'm really curious to set something up now.
You can run a homemade mix to get a higher concentrate of meth or just run washer fluid.
http://www.enginerunup.com/can-i-use...d-/info_22.php
It needs to be refilled but can be done in your driveway or during a lunch break.
Reply
Old Jun 20, 2006 | 06:46 PM
  #29  
juststickit124's Avatar
Thread Starter
Senior Member
 
Joined: 03-09-06
Posts: 2,425
Likes: 0
From: "The Valley"-California
O, so it's a resivour tank with a digitally controlled pump?
Reply
Old Jun 20, 2006 | 06:50 PM
  #30  
SRT-4_UK's Avatar
New Member
 
Joined: 04-20-06
Posts: 82
Likes: 0
From: RAF Mildenhall, England
Resivour tank, yes. The pump is controlled by either a progressive controller or a boost switch. The boost switch will turn all the way on at a preset boost level. The progressive controller will start the flow low and progressivly get higher as the boost climbs.
Reply
Old Jun 20, 2006 | 06:52 PM
  #31  
juststickit124's Avatar
Thread Starter
Senior Member
 
Joined: 03-09-06
Posts: 2,425
Likes: 0
From: "The Valley"-California
Sounds great, I really appreciate the info!
Reply
Old Jun 20, 2006 | 06:54 PM
  #32  
05YELLOWSS's Avatar
Senior Member
 
Joined: 08-28-05
Posts: 757
Likes: 0
From: Pope AFB, NC
I prefer a nice shot of the happy juice...but hey that's me...
Reply
Old Jun 20, 2006 | 06:55 PM
  #33  
SRT-4_UK's Avatar
New Member
 
Joined: 04-20-06
Posts: 82
Likes: 0
From: RAF Mildenhall, England
If you need any more info, just pm me. I am happy to help.
Reply
Old Jun 20, 2006 | 06:56 PM
  #34  
SRT-4_UK's Avatar
New Member
 
Joined: 04-20-06
Posts: 82
Likes: 0
From: RAF Mildenhall, England
Originally Posted by 05YELLOWSS
I prefer a nice shot of the happy juice...but hey that's me...
Yeah but you can do that with all your other supporting mods. I wish I could run a 75 wet shot right now.
Reply
Old Jun 20, 2006 | 06:57 PM
  #35  
juststickit124's Avatar
Thread Starter
Senior Member
 
Joined: 03-09-06
Posts: 2,425
Likes: 0
From: "The Valley"-California
Originally Posted by SRT-4_UK
If you need any more info, just pm me. I am happy to help.
GOT $200? LOL JK, thanks I'll let you know how is goes after I try fabricating some prototypes.
Reply
Old Jun 20, 2006 | 07:01 PM
  #36  
SRT-4_UK's Avatar
New Member
 
Joined: 04-20-06
Posts: 82
Likes: 0
From: RAF Mildenhall, England
Originally Posted by SRT-4_UK
If you need any more info, just pm me. I am happy to help.
I am poor after buying crap for my car. Military doesnt pay enough.
Reply
Old Jun 20, 2006 | 07:05 PM
  #37  
juststickit124's Avatar
Thread Starter
Senior Member
 
Joined: 03-09-06
Posts: 2,425
Likes: 0
From: "The Valley"-California
you still got way more mods then me too haha. Maybe I can get some sponsors involved in helping me make this. AEM and Injen are in the area, I wonder if they would like to help out.
Reply
Old Jun 20, 2006 | 07:16 PM
  #38  
SRT-4_UK's Avatar
New Member
 
Joined: 04-20-06
Posts: 82
Likes: 0
From: RAF Mildenhall, England
Help you with the cry02? from the picture, it looks like it is cooled by that tank in the trunk. It looks like the same thing as an intercooler cooler. It says that the bulb is chilled by the liquid co2. The only thing you will need to do is fab it onto the intake with some couplers. It would be easy with the stock intake.
Reply
Old Jun 20, 2006 | 07:21 PM
  #39  
juststickit124's Avatar
Thread Starter
Senior Member
 
Joined: 03-09-06
Posts: 2,425
Likes: 0
From: "The Valley"-California
Originally Posted by SRT-4_UK
Help you with the cry02? from the picture, it looks like it is cooled by that tank in the trunk. It looks like the same thing as an intercooler cooler. It says that the bulb is chilled by the liquid co2. The only thing you will need to do is fab it onto the intake with some couplers. It would be easy with the stock intake.
No the CRYo2 is easy, I mean a custom freon cooled type of system.
Reply
Old Jun 20, 2006 | 07:22 PM
  #40  
juststickit124's Avatar
Thread Starter
Senior Member
 
Joined: 03-09-06
Posts: 2,425
Likes: 0
From: "The Valley"-California
Originally Posted by juststickit124
I'm still trying to fabricat it working on AC freon though, but can't figure out how to get the freon cold without running the factory ac. Maybe an aux compressor and condesor? Mount a little condensor in front of the stock one and the compressor in that open area just to the left of the motor mount. But the compressor would have to be run of a pully wouldn't it?
I'm talking about this idea
Reply
Old Jun 20, 2006 | 07:27 PM
  #41  
SRT-4_UK's Avatar
New Member
 
Joined: 04-20-06
Posts: 82
Likes: 0
From: RAF Mildenhall, England
you sound like John Coletti (was head of SVT) with the Supercooler idea
Reply
Old Jun 20, 2006 | 07:28 PM
  #42  
juststickit124's Avatar
Thread Starter
Senior Member
 
Joined: 03-09-06
Posts: 2,425
Likes: 0
From: "The Valley"-California
Is that a good thing?
Reply
Old Jun 20, 2006 | 07:32 PM
  #43  
SRT-4_UK's Avatar
New Member
 
Joined: 04-20-06
Posts: 82
Likes: 0
From: RAF Mildenhall, England
He did run SVT. He tried it on the new lightning but they never made it. Google it so you can see how he tried.
Reply
Old Jun 20, 2006 | 07:39 PM
  #44  
juststickit124's Avatar
Thread Starter
Senior Member
 
Joined: 03-09-06
Posts: 2,425
Likes: 0
From: "The Valley"-California
The idea worked on concepts it looked like, I'm trying to make a less complicated faster way to cool the air I guess. We don't have liquid to air IC though ( I think, I don't know a lot about modern cars, just about old school muscle! so sorry if I'm wrong guys, don't bash me.)A buddy of mine built a supercooler type thing and is actually selling them for lightings. I see him friday's I'll talk to him about it.
Reply
Old Jan 30, 2009 | 07:17 PM
  #45  
ioncougar's Avatar
New Member
 
Joined: 05-27-08
Posts: 2
Likes: 0
From: tunkhannock, PA
ok I have a question. Can I run water/methanol on a N/A engine and will it give me any kind of results. I know its really ment for boosted engines but it seems like it would work. I'm still debating on the Cry02 system as it seems like it could work and could also serve as a purge system only for show but still fun.

P.S. By the way Im runing a 2.2 Saturn Ion. I know I'm in a Cobalt forum but we basically have the same engines.
Reply
Old Jan 30, 2009 | 07:19 PM
  #46  
Bl4des's Avatar
Senior Member
iTrader: (4)
 
Joined: 12-28-07
Posts: 2,931
Likes: 1
From: West Milford, NJ
way to bring a thread back from the dead
Reply
Old Jan 30, 2009 | 08:40 PM
  #47  
juststickit124's Avatar
Thread Starter
Senior Member
 
Joined: 03-09-06
Posts: 2,425
Likes: 0
From: "The Valley"-California
Originally Posted by ioncougar
ok I have a question. Can I run water/methanol on a N/A engine and will it give me any kind of results. I know its really ment for boosted engines but it seems like it would work. I'm still debating on the Cry02 system as it seems like it could work and could also serve as a purge system only for show but still fun.

P.S. By the way Im runing a 2.2 Saturn Ion. I know I'm in a Cobalt forum but we basically have the same engines.
I'm not sure, someone else would probably know a little better. How the heck did you find this thread it's 2 years old.
Reply
Old Jan 31, 2009 | 12:57 AM
  #48  
Rodimus_Prime's Avatar
Senior Member
iTrader: (3)
 
Joined: 04-02-06
Posts: 4,513
Likes: 0
From: Harrisburg, PA
im going to do this i have the intercooler spray bar for it and a bottle
Reply
Old Jan 31, 2009 | 01:01 AM
  #49  
rockstar014's Avatar
Senior Member
 
Joined: 05-30-08
Posts: 2,309
Likes: 0
From: kentucky
i heard a lot of good thing about cry02 systems summit motors has a big thing about them they sponcered the races last year
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
no_ss
Problems/Service/Maintenance
11
Oct 18, 2015 11:58 PM
goaliemo
2.0L LSJ Performance Tech
6
Sep 28, 2015 01:37 PM
z28addiction
Wanted - What to buy - All categories
0
Sep 28, 2015 12:03 AM
DocSvensk
2.0L LNF Performance Tech
7
Sep 27, 2015 02:24 PM
OrangeCoba
Problems/Service/Maintenance
0
Sep 25, 2015 06:06 PM




All times are GMT -4. The time now is 01:54 AM.