My buddies went to NOPI in Atlanta and got to see the Stage 3 kit on the dyno. It laid down 250whp without the nitrous. I'm not sure what type of dyno it was.
Here's an idea for the guy that ordered the kit. You'll be taking one for the team here, but you still get to use your kit. Post the tune for the PCM on HPTuners files library or whatever it's called. Then people can rock their non GM parts and spray their bottles without ever having to buy GM's stuff if they so desire. Better yet they can buy an extra PCM from Intense and flash that one, and swap if necessary so their VIN isn't condemed to GM warranty death. :twothumbs |
yea, I do have this kit on order. I checked on the status today and it has been shipped. It is in Michigan on its way to Ca. It should hit here on
friday or Monday the 18th. When it arrives I will let you guys know and give you all the info/instructions thay comes with it. |
Originally Posted by marzbarz
i coudnt find that stage..just says its 332$but has no pic or name..how much is it and do u have to have stage 2 already..i meanu say it caome with a pulley and a new ecu right..so i dont think u need to have a stage 2 setup in order to buy a stage 3??? thanks
|
Originally Posted by mikeg
yea, I do have this kit on order. I checked on the status today and it has been shipped. It is in Michigan on its way to Ca. It should hit here on
friday or Monday the 18th. When it arrives I will let you guys know and give you all the info/instructions thay comes with it. what part of cali you in. cuz i might just have to make a drive to come look at the part and your balt ;) |
I live in northern Ca.
Bar Area. About 20 minutes north of S.F. You? |
I am a tech at a chevy dealer, if u dont believe me ask Ljavy, i was the one who fixed his car. I just talked to my parts manager, and YES!!!! this is STG3!!!!!!! call BS if u want but i am telling the truth. Comes nitrous ready. ITS here!
|
Originally Posted by mikeg
I live in northern Ca.
Bar Area. About 20 minutes north of S.F. You? so cal oceanside halfway in between san diego and LA |
Originally Posted by SuperSport4
I am a tech at a chevy dealer, if u dont believe me ask Ljavy, i was the one who fixed his car. I just talked to my parts manager, and YES!!!! this is STG3!!!!!!! call BS if u want but i am telling the truth. Comes nitrous ready. ITS here!
so does it void the warranty? please tell us everything we need to know about it:twothumbs |
In the instructions for the build book it states that stage 3 pulley is 72mm which works out to be a 2.85'' pulley
|
Originally Posted by SuperSport4
I am a tech at a chevy dealer, if u dont believe me ask Ljavy, i was the one who fixed his car. I just talked to my parts manager, and YES!!!! this is STG3!!!!!!! call BS if u want but i am telling the truth. Comes nitrous ready. ITS here!
Yup, he speaks the truth guys. Believe him. lol |
I just called the GM dealer that we deal with here at the tire shop I works at in Canada. I asked about the intercooler end plate #88958721 thats on the GM Crate Engine site, they want 707.50 retail and 566.00 our cost. Thats totally crazy! Why would their price be so high? The bottle #22630381 they only want $55.32 so thats not too bad. Also do you guys know where the air purge line goes to? I can't quite tell if it hooks up some where or is just there to bleed the air and then it just stays there.
|
Originally Posted by BlackSS/SC
I just called the GM dealer that we deal with here at the tire shop I works at in Canada. I asked about the intercooler end plate #88958721 thats on the GM Crate Engine site, they want 707.50 retail and 566.00 our cost. Thats totally crazy! Why would their price be so high? The bottle #22630381 they only want $55.32 so thats not too bad. Also do you guys know where the air purge line goes to? I can't quite tell if it hooks up some where or is just there to bleed the air and then it just stays there.
|
This is in Canada too BTW, so even if you can do it cheaper the shipping and duty and shit will probably make it more. Thanks for the offer anyways.
So does anyone know if the end plate with the extra coolant resivior(with the stock heat exchanger) is better than having just the bigger heat exchanger? |
what size is this stage 3 pulley? anyone know what the gains are for GMPP Stage 3?
|
2.9. and not sure... I mean 2.9 should give you around 10, 50 shot of NOS is about 50. If you run higher octane, maybe another 10-15. So anywhere from 10-75WHP
|
where can i get a 2.9 that will go on the gms2 hub?
|
Do does anyone have anything to say about the difference between running the dual pass end plate with the stock heat exchanger verus a bigger heat exchanger with the stock end plate?
|
Originally Posted by fWdCoBaLt
where can i get a 2.9 that will go on the gms2 hub?
https://www.cobaltss.net/forums/show...+2.9%22+pulley P.S. Good question BlackSS/SC |
got my kit today.
|
Originally Posted by mikeg
got my kit today.
|
Originally Posted by mikeg
got my kit today.
|
Dude do u have to be the first guy on the block with the damn mistery item? you don't even know what u just ordered!!! more cash then brains
|
So I now have the serge tank and the cap, I've looked at all the autoparts and hardware stores, none of them have a metal 3/4" Y. All they have is plastic, would you guys use plastic on there?
|
Originally Posted by BlackSS/SC
So I now have the serge tank and the cap, I've looked at all the autoparts and hardware stores, none of them have a metal 3/4" Y. All they have is plastic, would you guys use plastic on there?
|
MikeG, I'm curious did the PCM come pre-tuned?
I don't see anything about specifying your year and make, when ordering on gmpartsdirect. So does it just come with another reflash code, for taking to the dealer? I'm sure everyone is dying for more info! Let us have it!!! Congrats on the kit. :cssNET: |
All times are GMT -4. The time now is 09:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands