2.0L LSJ Performance Tech 205hp Supercharged SS tuner version. 200 lb-ft of torque.

gm stage 3 is in ready to rock

Thread Tools
 
Search this Thread
 
Old Sep 2, 2006 | 10:00 PM
  #1  
EVILZ24's Avatar
Thread Starter
New Member
 
Joined: 07-15-05
Posts: 20
Likes: 0
From: CAROL STREAM
gm stage 3 is in ready to rock

i have the gm stage 3 kit in and will be installing it at showing it off a nopi nationals in the gm booth if i could figure out how to post pics up i would show everyone maybe someone could let me know
Reply
Old Sep 2, 2006 | 10:02 PM
  #2  
NightmareSS's Avatar
Member
 
Joined: 06-22-05
Posts: 363
Likes: 0
From: Plano, IL
Originally Posted by EVILZ24
i have the gm stage 3 kit in and will be installing it at showing it off a nopi nationals in the gm booth if i could figure out how to post pics up i would show everyone maybe someone could let me know
Bob, Send me the pics and I'll post them for you. -Erik-
Reply
Old Sep 2, 2006 | 10:04 PM
  #3  
chipmonk212121's Avatar
Senior Member
 
Joined: 01-23-06
Posts: 1,216
Likes: 0
From: Grant Park, Illinois
whats in the kit?
Reply
Old Sep 2, 2006 | 10:05 PM
  #4  
EVILZ24's Avatar
Thread Starter
New Member
 
Joined: 07-15-05
Posts: 20
Likes: 0
From: CAROL STREAM
whats your email
Reply
Old Sep 2, 2006 | 10:06 PM
  #5  
toydriver00's Avatar
New Member
 
Joined: 06-22-06
Posts: 149
Likes: 0
From: VA BEACH, VA
Originally Posted by chipmonk212121
whats in the kit?

I have a feeling that that is the question of the hour.
Reply
Old Sep 2, 2006 | 10:11 PM
  #6  
Witt's Avatar
Senior Member
 
Joined: 03-03-06
Posts: 4,958
Likes: 0
From: Pittsburgh, PA
Originally Posted by toydriver00
I have a feeling that that is the question of the hour.
Posting in a soon to be epic thread.

Also curious to the final answer.
Reply
Old Sep 2, 2006 | 10:13 PM
  #7  
chipmonk212121's Avatar
Senior Member
 
Joined: 01-23-06
Posts: 1,216
Likes: 0
From: Grant Park, Illinois
there are going to be 50 people asking the same question as me but in different words just so they can have their names in this thread. What everyone needs to do is NOT post and let him post then go oooohhhhhh, aaahhhhhh....
Reply
Old Sep 2, 2006 | 10:15 PM
  #8  
p7x's Avatar
p7x
Senior Member
 
Joined: 01-15-05
Posts: 5,126
Likes: 0
From: Ottawa
as usual, im patiently waiting
Reply
Old Sep 2, 2006 | 10:20 PM
  #9  
turboeco's Avatar
Senior Member
iTrader: (1)
 
Joined: 02-07-05
Posts: 984
Likes: 0
From: PA
My question is how the hell doesn't Bob Mull know how to post pics?

Can't wait for the pics, I want this ASAP for the dual pass intercooler plate.
Reply
Old Sep 2, 2006 | 10:27 PM
  #10  
JCswoosher2's Avatar
Senior Member
 
Joined: 07-10-05
Posts: 3,482
Likes: 0
From: Douglasville, Georgia
is that really Bob Mull?
Reply
Old Sep 2, 2006 | 10:29 PM
  #11  
EVILZ24's Avatar
Thread Starter
New Member
 
Joined: 07-15-05
Posts: 20
Likes: 0
From: CAROL STREAM
probably cuase i dont post so i dont have to listen to people talk crap , also what comes in the kit is as follows 76 mm pulley unique pcm 2 pass intercooler in the pcm adjustable revlimit up to 8000 rpm octane switch spark curve for 100 octane racing fuel and a nitrous switch into the pcm to run a 55 shot
Reply
Old Sep 2, 2006 | 10:30 PM
  #12  
JCswoosher2's Avatar
Senior Member
 
Joined: 07-10-05
Posts: 3,482
Likes: 0
From: Douglasville, Georgia
8000!!!! holy crap. whats the retail on that? how r u going to show it off there? are u going to drive it around maybe at some simulation
Reply
Old Sep 2, 2006 | 10:32 PM
  #13  
CobaltSonOfS.A.M.'s Avatar
New Member
 
Joined: 05-25-06
Posts: 154
Likes: 0
From: Indianapolis, IN
oooooohhhh, ahhhhhh
Reply
Old Sep 2, 2006 | 10:33 PM
  #14  
toydriver00's Avatar
New Member
 
Joined: 06-22-06
Posts: 149
Likes: 0
From: VA BEACH, VA
Well

Reply
Old Sep 2, 2006 | 10:33 PM
  #15  
EVILZ24's Avatar
Thread Starter
New Member
 
Joined: 07-15-05
Posts: 20
Likes: 0
From: CAROL STREAM
no i guess i shouldnt say im showing it off but it wil be hilighted also i should have my dyno sheet by nopi of the fully built motor with the gm stage 3 kit
Reply
Old Sep 2, 2006 | 10:35 PM
  #16  
cMw's Avatar
cMw
Member
 
Joined: 07-30-06
Posts: 348
Likes: 0
From: Baltimore, MD
awaiting pics patiently


i think we all figured the shot of nitrous, just didnt know how much...
Reply
Old Sep 2, 2006 | 10:36 PM
  #17  
JCswoosher2's Avatar
Senior Member
 
Joined: 07-10-05
Posts: 3,482
Likes: 0
From: Douglasville, Georgia
doesnt this ruin the pistons even more?
Reply
Old Sep 2, 2006 | 10:37 PM
  #18  
EVILZ24's Avatar
Thread Starter
New Member
 
Joined: 07-15-05
Posts: 20
Likes: 0
From: CAROL STREAM
ill post pics up sunday
Reply
Old Sep 2, 2006 | 10:39 PM
  #19  
p7x's Avatar
p7x
Senior Member
 
Joined: 01-15-05
Posts: 5,126
Likes: 0
From: Ottawa
Originally Posted by EVILZ24
probably cuase i dont post so i dont have to listen to people talk crap , also what comes in the kit is as follows 76 mm pulley unique pcm 2 pass intercooler in the pcm adjustable revlimit up to 8000 rpm octane switch spark curve for 100 octane racing fuel and a nitrous switch into the pcm to run a 55 shot

76 mm pulley im going to guess is a typo or else it's weak seeing how stage 2 comes with 77.9 mm. The dual pass intercooler and pcm adjusting sounds coo. Well there goes my warrenty

Dont the valve springs start floating between 6850-7200 rpm. 8000 rpm sounds pretty crazy.
Reply
Old Sep 2, 2006 | 10:42 PM
  #20  
JCswoosher2's Avatar
Senior Member
 
Joined: 07-10-05
Posts: 3,482
Likes: 0
From: Douglasville, Georgia
u know to get it on the Civic Si's RPM level


JK
Reply
Old Sep 2, 2006 | 10:42 PM
  #21  
Badmunky's Avatar
Senior Member
 
Joined: 12-26-05
Posts: 1,602
Likes: 0
From: Michigan
I wunder if we will bw able to just get the dull pass intercooler core without the rest of the kit?

Thats all I want out of it.

Later
Reply
Old Sep 2, 2006 | 10:44 PM
  #22  
JCswoosher2's Avatar
Senior Member
 
Joined: 07-10-05
Posts: 3,482
Likes: 0
From: Douglasville, Georgia
same here. sounds cool as crap. id blow something up with nitrous.
Reply
Old Sep 2, 2006 | 10:46 PM
  #23  
TheYellowSS's Avatar
Senior Member
 
Joined: 04-18-06
Posts: 1,391
Likes: 0
From: Delaware
Originally Posted by JCswoosher2
id blow something up with nitrous.

Same here
Reply
Old Sep 2, 2006 | 10:47 PM
  #24  
MrStaticX's Avatar
Member
 
Joined: 09-23-05
Posts: 242
Likes: 0
From: Manchester, NH
newb question... what is a dual pass intercooler core?
Reply
Old Sep 2, 2006 | 10:47 PM
  #25  
l Sh1ft l's Avatar
Senior Member
 
Joined: 04-24-06
Posts: 2,191
Likes: 0
From: Canton Ohio
Interested...
Reply



All times are GMT -4. The time now is 06:53 PM.