ItalianJoe1

iTrader: (10)

So i'm returning to stock a car that was modded and turbo swapped at some point. I'm laying out the harness and the connection for the stock I/C pump isn't there. Can someone look at an LSJ and tell me, roughly, where it should be on the main harness bundle and how far from a next connection, so I can open up the harness where it should roughly be and see if he cut it off? Thanks in advance.

mrbelvedere

iTrader: (3)

should be around the knock sensor

ItalianJoe1

iTrader: (10)

Yeah that's what I was expecting and I looked around and couldn't see anything obvious. I guess i'll split the loom and see whats there.

ItalianJoe1

iTrader: (10)

For anyone who runs into it, it comes out about 6 inches from the a/c clutch connector.

Also the standard EV1 injector harness ends are the exact same as the pump, so I took a set of 6 from the junkyard from a volvo or something and spliced one in. Have the extras if anyone ever needed them.