mrbelvedere

iTrader: (3)

im pretty sure they are the same as the m62 and zzp keeps them in stock

are we talking about the engine or the blower

TStone

iTrader: (2)

I thought the blower.....

Verbatim

iTrader: (1)

lol
I know engine aint outta time
I work on these POS's for a living

JapEatr

iTrader: (9)

Blower out of time

Verbatim

iTrader: (1)

well my buddy has a couple cracked m62 cases...thanks ZZP...******
and I was looking at the bearings and they look REALLY close to what I remember the tvs has

I just need to make sure that ***** gonna work, cause this turd is currently the DD and its gonna have to be the fastest blower rebuild in history

TStone

iTrader: (2)

pfft. you got til monday :p

Verbatim

iTrader: (1)

how could the blower jump time?

Verbatim

iTrader: (1)

****; im busy today
spending all day on camaro and tomorrow is the local yearly cruise then going to dinner with the family tomorrow night

...I dont ever do ****, but when I have plans and things going on...yup car problems

mrbelvedere

iTrader: (3)

they don't just jump time they have to be assembled out of time

Powell Race Parts

iTrader: (3)

changing Harrop needle bearings is not for the faint hearted. I see bad things happening if you try Verbatim. Make sure its not something else like a broken tensioner guide.

Verbatim

iTrader: (1)

Oh I've been thru the timing and delt with shot case bearings john...personally, I'd rather have motor issues instead of blower issues.

Any different m62->TVS when it comes to rebuild?
I've looked at the m62 case I got; I'm thinking a pilot bearing puller that screws into slide hammer; screw piece of allthread in there and have a plate where snout bolts to, that the allthread goes thru the plate and basically use a nut to pull the bearings out

...if you can smell what I'm stepping in.

Powell Race Parts

iTrader: (3)

i have new slide pullers for this purpose. gotta heat the case to get them out, I dont like it. Harrop fix mine

mrbelvedere

iTrader: (3)

getting tvs bearings out is a mega sadistic pain in the ass let zzp do it

Powell Race Parts

iTrader: (3)

^^^^ TROOF. Although ZZP may not want. To do it, it's an expensive rotten job like you say.

06blackg85ss

iTrader: (1)

well I"ll just leave this here.... testing with tvs begins in a week or so

mrbelvedere

iTrader: (3)

badass

armcclure

iTrader: (2)

Interesting

100% METH

iTrader: (3)

Finally someone has done it!

06blackg85ss

iTrader: (1)

eh couldn't sit by any longer. Damn people pushing me to work on the car again.
more stuff in the works and details once we are finished.
Great results though so far, just need to reroute some hoses as I screwed up and have it flowing through the he's in the wrong order (drinking while doing detail work is a no no lol)
might be tossing advise's tvs with a 2.7 pulley on this week or next.

Area47

sucker.


p.s.
Jackass

06blackg85ss

iTrader: (1)

lol jackass is right.
eh I'm bored, both vettes are down awaiting parts, trans am is looking like being on hold until the spring, and trying not to do anymore to the wrx..... so that leaves me the cobalt to play with for now.

Area47

i am scouring the nation for pistons that aren't melted, or hypereutectic. the truck may be done on the 5th of nope.

06blackg85ss

iTrader: (1)

lol I've been keeping tabs on that on f.b.
guess not an easy thing to find huh.
shoulda kept the cobalt lol. (j/k)

mine ain't worth ****, so I'm keeping it, was running non intercooled on e85 and a m62 w/2.7 pulley for about a year now lol. nice seeing my wot iat's below the temp of the sun

Area47

I have 6 pistons and rods being shipped to me this week. lol. I found some!

now I have 9 of them....

Time to balance them and see what happens

Blowncavy

iTrader: (2)

06blackg85 thats a nice looking well built HE
What brand?