im pretty sure they are the same as the m62 and zzp keeps them in stock

are we talking about the engine or the blower

 

I thought the blower.....

 

lol
I know engine aint outta time
I work on these POS's for a living

 

Blower out of time

 

well my buddy has a couple cracked m62 cases...thanks ZZP...******
and I was looking at the bearings and they look REALLY close to what I remember the tvs has

I just need to make sure that ***** gonna work, cause this turd is currently the DD and its gonna have to be the fastest blower rebuild in history

 

pfft. you got til monday :p

 

how could the blower jump time?

 

****; im busy today
spending all day on camaro and tomorrow is the local yearly cruise then going to dinner with the family tomorrow night

...I dont ever do ****, but when I have plans and things going on...yup car problems

 

they don't just jump time they have to be assembled out of time

 

changing Harrop needle bearings is not for the faint hearted. I see bad things happening if you try Verbatim. Make sure its not something else like a broken tensioner guide.

 

Oh I've been thru the timing and delt with shot case bearings john...personally, I'd rather have motor issues instead of blower issues.

Any different m62->TVS when it comes to rebuild?
I've looked at the m62 case I got; I'm thinking a pilot bearing puller that screws into slide hammer; screw piece of allthread in there and have a plate where snout bolts to, that the allthread goes thru the plate and basically use a nut to pull the bearings out

...if you can smell what I'm stepping in.

 

i have new slide pullers for this purpose. gotta heat the case to get them out, I dont like it. Harrop fix mine

 

getting tvs bearings out is a mega sadistic pain in the ass let zzp do it

 

^^^^ TROOF. Although ZZP may not want. To do it, it's an expensive rotten job like you say.

 

well I"ll just leave this here.... testing with tvs begins in a week or so

 

badass

 

Interesting

 

Finally someone has done it!

 

eh couldn't sit by any longer. Damn people pushing me to work on the car again.
more stuff in the works and details once we are finished.
Great results though so far, just need to reroute some hoses as I screwed up and have it flowing through the he's in the wrong order (drinking while doing detail work is a no no lol)
might be tossing advise's tvs with a 2.7 pulley on this week or next.

 

sucker.


p.s.
Jackass

 

lol jackass is right.
eh I'm bored, both vettes are down awaiting parts, trans am is looking like being on hold until the spring, and trying not to do anymore to the wrx..... so that leaves me the cobalt to play with for now.

 

i am scouring the nation for pistons that aren't melted, or hypereutectic. the truck may be done on the 5th of nope.

 

lol I've been keeping tabs on that on f.b.
guess not an easy thing to find huh.
shoulda kept the cobalt lol. (j/k)

mine ain't worth ****, so I'm keeping it, was running non intercooled on e85 and a m62 w/2.7 pulley for about a year now lol. nice seeing my wot iat's below the temp of the sun

 

I have 6 pistons and rods being shipped to me this week. lol. I found some!

now I have 9 of them....

Time to balance them and see what happens

 

06blackg85 thats a nice looking well built HE
What brand?