i'm running the 2.85 pulley ...what gap is everyone running with this pulley...i'm on stock plugs right now


i have 1 step colder plugs ready to go in ..just need the gap

 

anywhere between .35 and .38...

 

yea i was leanin to .35

 

.044 runs like a ******* charm with a 2.8 pully

 

i think i'm gonna start at .35 and go from there....

 

.44 is rather large... more power smaller gap.

 

u should lean towards the lower side of the stock spec. cause now there is more pressure in that cylinder and the more pressure, the more air = more resistance. but realy either way its not going to make or break anything as long as its within reason

 

im running .36 on a 2.85