like the title says which size pulleys do you guys like the best?

 

Depends on what injectors you have

 

Depends on what injectors you have

 

2.35" pulley

 

id say 2.7.
anything smaller gets way too hot and too dangerous.
but with a 2.7 be prepared to get some cooling mods, i needed them.

 

The one that is polished the most is the best. Don't matter what size it is, its the prettiest one that makes the most power.

 

I agree 100% with the 2.7, you can make around 275whp with 2.7, cai, exhaust, tuning and injectors...

 

2.7" if you live somewhere not hot as *****. 2.9" if you do.

 

"ooooohhhhhhhhh pretty!"


depends on how nutty in the head you are

 

can you get A 2.7 pulley in a 4 bolt pattern or do you have to get it in 5 cause i have a 2.8 but i want a little more whp but im not gonna go through the trouble of changning it over to a 5 bolt pulley

 

LMAO, I was about to say, where I live 2.7 is wayyy too small. Some people are running them but a guy I know is running a 2.9 and his car is the quickest balt I have seen down here.

Example, he went to the track a few weeks back and there was a guy running a 2.7 and he got a 14.9 1/4 mile!! The guy I know ran a 14.3 I believe it was. His problem was couldn't grab cause it was so hot out. Spun the tires completely through 2nd before it finally grabbed.

 

No Pulley!

Just route the belt onto the hub and secure a fastner so it wont slip off.