Rebel 3.5" TB Dyno Results
You guys ask and we deliver, so here are the results:
Vehicle Specs (before 3.5" TB): 2007 SS/SC GM Stage 2 with 3" pulley GM Honed manifold GM Cat back exhaust Rebel 3" Stainless Intake Below you will see the before and after, the blue lines are before and red after. Summary: Down low (3350rpm) we produced 11WTQ and 7WHP Mid range (4000rpm) we produced 8WTQ and 6WHP Top end (6000rpm) we produced 12WTQ and 14WHP Notes: 1. The only thing changed in the tune was the idle air flow ETC scaler area, no fueling or spark settings were changed. 2. The install as you can see took less than 24 minutes as you can see the dyno runs are 24 minutes apart. 3. With the above mods (before the new TB) we only produced 219WHP showing how our dyno reads lower numbers. But the beauty of it is the difference is accurate. Now compare this to the Twin Screw numbers 281WHP produced on the same dyno in the middle of summer (hotter temps). 4. The air/fuel went low 10's after 6000rpm which we expect from the GM Tune. There is plenty more power to be made here with some tuning. People who have installed this upgrade: "ok so i got this tb upgrade done today. i can now attest to this being an AWESOME F'ING UPGRADE! we dynoed somewhere from 10-15whp gain in the lower rpm range (below 3G) and somewhere from 10-20 lb ft gains. this isn't one of those mods where you find yourself debating whether you actually feel any difference either. you notice the difference right away. it pulls much harder and much sooner on the low end and this is exactly what the cobalt needed because it was lacking on the low end. now it feels awesome! i'm so glad i did this and i give much props to rebel for another fine upgrade! cheers guys!" "ill tell you right now throttle response in like no other cobalt ive driven b4 with the stock charger. its almost impossible to drive this thing slow since no matter what rpm you are in a slight touch of the gas the the car darts forward, first gear is that much more usless now lol. stomp in any gear and it pulls alot harder than what it was liek b4 all the way to redline. its a amazing mod to compliment all the other modifications i have to my car." The 3.5" TB and spacer GB will end tomorrow! Data Log Results: Without New TB: Boost 15.47 PSI MAF 31.57 LB/MIN With New TB: Boost 15.62 PSI MAF 31.57 LB/MIN So basically you don't see much of a difference top end in flow numbers. http://www.rebelautoworxs.com/Pictures/TB0.jpg http://www.rebelautoworxs.com/Pictures/TB1.jpg http://www.rebelautoworxs.com/Pictures/TB2.jpg The 3.5" TB and spacer will end tomorrow! On the list: 1. quadracer0387 2. Sunburst_SS (with intake) 3. Toyotech 4. IamTvor 5. joselo6 6. lsjwannabe 7. Boossted 8. ninja44 9. silentd 10. Area47 11. RedSSBaltSC 12. Coop 13. Rodimus_Prime 14 & 15. r0k0 (with intake no filter) (another spacer with 1/8" npt for meth) 16. 607Motorsports 17. my_bd 18. RG4 19. Freakenhye 20. Hockeyman0920 21. burntorange 22. Jumpin Fool (with intake polished) 23. Stihl (with intake) 24. SS/SC05/19/05 25. K-Train04RL (with intake) 26. Omega_5 27. darksol4life (with intake) 28. Blur.fx (with tap for meth) 29. WolfmanKiknAzz 30. kanabrewski (1 intake 2 spacers with one tapped) 31. SSKobald (2 spacers with on tapped) http://www.rebelautoworxs.com/Pictures/TBdynopic1.jpg http://www.rebelautoworxs.com/Pictures/TBdynopic2.jpg http://www.rebelautoworxs.com/Pictures/TBdynopic3.jpg |
dead on what i thought it would do.. good work guyz
|
good numbers, i might have to look into this after i get my wideband
|
my car looks purdy on the dyno! lol
this is definitely my favorite mod so far! +rep for rebel!! :D |
I'm I seeing something wrong here? I don't see any gains on the dyno. Differance of like 1hp and 1torq? Can someone explain what I'm missing here?
|
Originally Posted by R&C_rallySS
(Post 1560261)
I'm I seeing something wrong here? I don't see any gains on the dyno. Differance of like 1hp and 1torq? Can someone explain what I'm missing here?
|
Summary: Down low (3350rpm) we produced 11WTQ and 7WHP
Mid range (4000rpm) we produced 8WTQ and 6WHP Top end (6000rpm) we produced 12WTQ and 14WHP look closer. |
i think they are trying to say that you see a lot more low end torque, not so much max torque. which is really good considering our low end torque isnt that great.
|
While may be worth it to some it wouldn't be worth it to me. Nice work tho
|
nice.. cant wait to put this in my car..!
the tb will only be on the spring tho.. but cant wait :guns: |
Ok how do I pay you guys????
|
I would really like this for the 2.4
|
Originally Posted by joselo6
(Post 1561107)
Ok how do I pay you guys????
|
Good stuff Rebel, looks like this is a great mod!
|
Alright send me a private message on monday and tell me all the detail for the payment...... Deamn I cant wait to get this!!
|
Can you slap a 2.9" pulley, tune and then give us the dyno numbers? :)
|
nice expected some low mid range power increase and not so much max power. nice very nice. if i had the money i would so go for this.
|
Originally Posted by ebristol
(Post 1563621)
Can you slap a 2.9" pulley, tune and then give us the dyno numbers? :)
But I'm sure with the ones going out this coming week, we will see a lot of results and different setups |
Originally Posted by jimbos'ss
(Post 1560266)
the gains are in the low end not up top.
|
Would it be safe to install this 3.5 tb with stage 2 and a 2.9 pulley without a tune?
|
Originally Posted by R&C_rallySS
(Post 1564953)
Yea after looking closer I can see the gains now. WTF was I thinking I don't know. Thats not to bad of a gain. Is it to late to get into this GB?
|
Just PM when I need to pay.
Q: Any 3 inch intakes left? |
I dont see the 4.2L under the colorado's description, on 3.5 and 3.7L
|
well you need to use the 3.5L colorado TB
at the say time... you can find this throttle body on numerous vehicles: COLORADO 04-05 Throttle Valve Assm; 3.5L ENVOY 05 Throttle Valve Assm; 4.2L TRAILBLAZER 03-05 Throttle Valve Assm; (4.2L) HUMMER H3 06 BRAVADA 03-04 Throttle Valve Assm; (4.2L) ENVOY XL 03-05 Throttle Valve Assm; 4.2L ENVOY 03-04 Throttle Valve Assm; (4.2L) IMPALA 06 Throttle Valve Assm; 5.3L ISUZU ASCENDER 03-05 Throttle Valve Assm; 4.2L GRAND PRIX 05-06 Throttle Valve Assm; 5.3L ENVOY XUV 04-05 Throttle Valve Assm; 4.2L TRAILBLAZER EXT 03-06 Throttle Valve Assm; 4.2L CANYON 04-05 Throttle Valve Assm; 3.5L MONTE CARLO 06 Throttle Valve Assm; 5.3L TRAILBLAZER 06 Throttle Valve Assm; 4.2L RAINIER 04-05 Throttle Valve Assm; 4.2L SAAB 9-7X 05-06 6 cyl |
Okay thanks man!
|
All times are GMT -4. The time now is 05:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands