I currently have on order a 3 " zzp downpipe catless with wideband bunge. Also a zzp stage 3 heat exchanger and ingalls solid engine mount. Which will be here tomorrow. Monday I will have a POLISHED harrop tvs stage 3 kit from ottp, as well as a ottp 3in intake. And last but not least some new tranny mounts and r1 concepts drilled rotors and ceramic pad. Aside from all that I was curious If it would be alright to run the stage 3 kit with the tvs, the heat exchanger, and downpipe for about a month until I can get headers in from badnewsracing (they are on backorder) and finish catback also I know wideband gauge and dual pass opt b are vital. I just got my car a week ago and don't want to blow it up over the month but I want to install the kit. but I didnt know if I could run the stage three with no header and just a downpipe and heat exchanger as supporting mods. Eventually I plan to get option b and all that good stuff. Any advice would be great!

Thanks

 

Not sure exactly what you are asking. Does the ottp kit come with the actual TVS or are you adding that to the stage 3?

 

The kit comes with the tvs. They were sold out of the normal harrop tvs's but I talked to josh over there and he hooked it up with the last one which was polished they had for an additional 300 normally they are an additional 1000 for polished? But I wanted to know if it was safe to run the kit without header and catback and just a dp, and without an a/f gauge. Till the header comes in that is on back order, and till I can get a a/f gauge I just heard they are vital parts to have with an aftermarket tvs

 

as long as your tune supports the mods you have correctly, you will probably be ok.

 

um, i wouldnt run it without a wideband. you just spent like 2500, whats another 200 to make sure you dont blow **** up

 

I ran my tvs with a stock manifold/2.5 dp/2.25 catback for 30k or more.. lol..

 

dude no you will blow that ish up... you should stop what you are doing and ship everything to me so i can dispose of it properly....

 

Ottp tune is going to be a "safe" tune, imo yyou will be fine without a wideband for now, but you're obviously going to want to get one soon so you can reach the full potential of your setup

 

U will prolly be ok if u don't get on it to much....... or at all..... but if it was me I would Wana try. I say wait till.u get everything you need to be safe. its still a fast car stock. I would just wait and then get it tuned after all ur new parts are on .

 

^ I'm with this guy. Your header will probably come faster than that. They were back ordered when I bought mine, and it shipped 2 days later.