Weight Loss! Diet. PICS.
LSX RWD S/C conversion
iTrader: (2)
Joined: 03-25-05
Posts: 10,450
Likes: 277
From: Maple Ridge, BC, Canada
I took all those parts out to put in my roll cage and they weigh closer to 50lbs. I personally don't like the stripped down look so after the cage is done, it all goes back in. For those you want to gut the car thats your call because it's your car.
NOT 56K friendly Pics
Originally Posted by BlueSS-supercharged
well i guess were done talking **** to me so back to the reason of the thread. hey sushi can you get some more pictures of what it looks like from the trunk and more inside ones



The last one is from the trunk looking in.
Originally Posted by BlueSS-supercharged
so is that like a rubber mat or a piece of vinal?
I had to make a 1" square notch at the rear of the board to allow the battery cable to pass.
In the future, I plan on replacing the heavy stock battery with a Dyna-Batt in the glove box (or glove box area,) eliminating the long cable. I don't want to go too small on the Dyna-Batt, because my e-rams draw a lot of current, so I may need to place it in another area, like in the depressions under the plywood flooring.
Originally Posted by SwizzDSMSS
No I'm going to make a sick ass chair outta it!!! It is going to be my XBOX 360 Chair.
Originally Posted by 20secobalt
at least he doesnt drive a cobalt
My son, against my advise, bought a Ford Ranger - That was 2 trucks ago - he'll never own another.
Not to say anything bad against Fords - but they suck! ... sorry, had to vent.
Thread
Thread Starter
Forum
Replies
Last Post



