during this winter i am going to be changing the pulley and doing a couple of other things i allready have the front end torn apart i will post up some pictures my car already put down 220hp at the wheels and 198tq that was with 10 pounds of boost and non-intercooled and just a base tune

 

Excellent.

Good luck!

 

misfitcobalt, are you running stock internals?

 

^^ thats my question. im only running like 210whp with a 3" pulley and 11psi, but i have a VERY conservative tune as well. especially due to stock CR pistons. So are you swapping to lower CR pistons? or sticking with stockers?

 

very cool, wht gear are u running? all stuck LSJ stuff, intake ect?

tuning with the F/IC?

 

from what i understand the rods are rated at 250hp, be very careful? and intercool the bitch

 

im running stock internals.... i know at 250 are rods go boom if thats the case i have a 07 motor in my garage that i will tear down and put forged pistions and rods in... im still running the aem fic seems to be fine for me.. aem is coming out with a new FIC for gm so you can control the maf. also going to be getting customs axles made because next season i swapping my drag radials for slicks... i will keep you guys updated

 

ooo0o0o0o im exited to hear about this new FIC!