2.2 turbo's repoty here
Why not look at the dyno thread. 
What you need to do is pick a powergoal and start from there. Then figure out if your motor can take it and then go on to picking your turbo size and everything else.
What you need to do is pick a powergoal and start from there. Then figure out if your motor can take it and then go on to picking your turbo size and everything else.
well a fellow member who sold his car now, i think, was running a GT28RS60 turbo at 10 pounds and he put down 249HP. I ran 12 pounds with that same turbo and my car took it and is still running
which is the most these motors can take, says the GM build book.
to be safe i think you could run 7 pounds with a T3 Super 60
which is the most these motors can take, says the GM build book.
to be safe i think you could run 7 pounds with a T3 Super 60
ok i might just do 6 to be safe which i prob will turn it up then blow it haha but hey...ok will it still have that pull like a turbo...i know it sounds stupid but ive been in turboed cars like stock wrx or an audi TT stock and u cant really feel the turbo boost really... then i go into like a Nsrt4 with like 18lbs and it pulls like a bat outta hell? i know its 18 but what should i expect
I'm turbo, 7lb's for now, car pulls like a beast and seems to be taking it just fine, i plan on going to 9lb's in the near future. t3/t4 turbonetics 50 trim... I won't be on a dyno until late summer or more like fall, so if the motor makes it till then, i'll post numbers...
Thread
Thread Starter
Forum
Replies
Last Post



