Ok so I have a 05 2.2L Balt and I put an oil pressure gauge in the side of the head and I've noticed when it's cold it runs between 60-80 psi but after a while of runnin and car is fully warmed up it sits at like 19 psi at idle and there's oil goin through the pcv hose into the intake I've tryed a catch can but it fills up too quick and still goes through I've noticed that it looks a lil milky from time to time too

 

# 1 your oil pressure is fine. 100%.
#2 you dont need a catch can
#3 get a new oil filler cap iirc the cap on your 05 2.2 is vented, and it is probably plugged, my 2.2 wntr btr did the same thing.
#4 drive it harder and longer, its an eco and it loves to be thrashed.

 

Where around Oshawa would I get one does it have to be a certain one.
Or is there anyway I could clean it or unglug it at all.

 

dealer shouldn't be expensive

 

stop by i can clean it up for you. 5 minutes. Free. I may even have a spare one. I am back in the office wednesday; Port Perry is about what? 15 minutes from Courtice...

 

I think I mite have cleaned it I used a rag and picked away at it but I need to do an oil change so I'm goin to do a flush and see how it turns out