cry02?
#1
New Member
Thread Starter
Join Date: 10-22-08
Location: pittsburgh
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
cry02?
Heard good stuff about it, safer, easier install, 25-35 hp. anyone have this or know anything about it?
http://www.designengineering.com/pro...sp?m=sp&pid=72
http://www.designengineering.com/pro...sp?m=sp&pid=72
#2
This is a cooling mod though, and a stockish 2.2 doesn't need that like an ss/sc does.
I'm not convinced that the cooling will negate the bad effects of having something blocking part of the intake system.
The cry02 intercooler spray bar is a good idea for f/i applications though.
I'm not convinced that the cooling will negate the bad effects of having something blocking part of the intake system.
The cry02 intercooler spray bar is a good idea for f/i applications though.
#3
Senior Member
Join Date: 03-25-07
Location: East Texas
Posts: 1,382
Likes: 0
Received 0 Likes
on
0 Posts
I'm planning on getting a bottle of this soon. Basically it just cools your intake/intercooler to the extreme.
On the tests I've seen done, on a ~300hp srt4 it made 15hp. Not bad if you're making that kind of power.
On the tests I've seen done, on a ~300hp srt4 it made 15hp. Not bad if you're making that kind of power.
#7
Senior Member
Cryo is really just intended as an Intercooler sprayer. Unlike Nitrous, CO2 doesn't contain combustible oxygen so it won't add the same power even if it is cold.
#8
New Member
Join Date: 05-27-08
Location: tunkhannock, PA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
From what I understand about these systems is that they are pretty modular. They say that the normal set up would be for the C)2 to go to the intake cooler, then to the fuel line cooler, and then to use an intercooler sprayer as the vent. You don't need to use the sprayer you can just vebt it after the fuel line or intake cooler or use a purge system as the vent. C02 is not injected into the intake or any part of the engine but rather a heat sink sort of block that freezes and extracts heat. In my opinion a cooler intake charge as well as cooler fuel could help, but I'm still not sure if it would be worth the money on a N/A setup such as mine. It is cheaper an way safer than nitrous injection but probably no where near as effective.
Thread
Thread Starter
Forum
Replies
Last Post