Hey guys I remember reading this somewhere on here but cant find it to save my life now...anyone know what size bolts are needed for the idler pulley and tensioner ......

and what size bolts do i need to accommodate the alternator bracket from the ss/sc i remember reading they needed to be 1 inch longer then the stock ones on the 2.4l but iam just wondering if anyone knows the exact dimensions this would save me a grip of trouble

 

don't remember. take your stock bolt, bring it to a fastenal and get a 1" longer one. or longer...then cut it.

 

If you cut the bolt, make sure you thread a nut on first. Then when you back the nut off the bolt, it'll straighten all the threads.

 

and don't over tighten or youwill strip the threads.

 

wow interesting

 

M8 1.25 threading. I believe either 120mm or 130mm....measure the stocker and add 25mm to it. You can round up or down if its an odd number

 

sick and how about the bolts on the tensioner???

 

those are the bolts for the tensioner/alternator. I have no idea what size the idler bolt is...i reused the factory one so i didnt need the measurements