2.4ss/sc build commenced!!!
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: 11-01-05
Location: San Antonio,TX
Posts: 5,446
Likes: 0
Received 0 Likes
on
0 Posts
2.4ss/sc build commenced!!!
Today, me, alleged, and two of our other friends started the install of the supercharger kit.... we were able to remove everything, and was able to install the lsj intake manifold, and stock intake system(gonna do air box mod for now)
Tomorrow we are gonna do most of the wiring, install stock lsj heat exchanger, and boost gauge. Also gonna run the hoses, and see what else we can do....
parts still on the way: zzp heat exchanger, 60lb injectors, spark plugs, innovate wideband, map sensor pigtail, and upper radiator hose. Oh and still need to find 120mm bolts for the alternator.
So we should be done by next weekend!!!
Tomorrow we are gonna do most of the wiring, install stock lsj heat exchanger, and boost gauge. Also gonna run the hoses, and see what else we can do....
parts still on the way: zzp heat exchanger, 60lb injectors, spark plugs, innovate wideband, map sensor pigtail, and upper radiator hose. Oh and still need to find 120mm bolts for the alternator.
So we should be done by next weekend!!!
#5
Senior Member
Thread Starter
iTrader: (1)
Join Date: 11-01-05
Location: San Antonio,TX
Posts: 5,446
Likes: 0
Received 0 Likes
on
0 Posts
day 2... yeah... day 2... its cold and windy outside... so.... I bought wiring and I'm gonna get everything nice and neat for everything that needs to be extended.
#6
Senior Member
Join Date: 03-28-08
Location: bedford, tx
Posts: 2,331
Likes: 0
Received 0 Likes
on
0 Posts
tell me how this goes i should start next week lol waiting on a few more parts
hey i forgot i need a gasket for the endplate where did u gte urs at
hey i forgot i need a gasket for the endplate where did u gte urs at
Last edited by cobaltss86; 02-14-2009 at 08:48 PM. Reason: Automerged Doublepost
#9
Senior Member
Join Date: 03-04-08
Location: The 201, New Jersey
Posts: 1,614
Likes: 0
Received 0 Likes
on
0 Posts
damn I would love to just watch this be done. I want to learn so much about F/I and more advanced stuff with mechanical stuff. Like I get the basics of how it works and all, but to read and see it are two totally different things. Anyway best of luck with the soon-to-be beast!
#12
Senior Member
Thread Starter
iTrader: (1)
Join Date: 11-01-05
Location: San Antonio,TX
Posts: 5,446
Likes: 0
Received 0 Likes
on
0 Posts
yeah we are gonna hit it hard tomorrow, all day long..... and if I have any ???? I'll give you a call or text you
oh hey sleeper love the boxes!!! Made me think I was getting a harrop lol
oh hey sleeper love the boxes!!! Made me think I was getting a harrop lol
#14
#17
Senior Member
Thread Starter
iTrader: (1)
Join Date: 11-01-05
Location: San Antonio,TX
Posts: 5,446
Likes: 0
Received 0 Likes
on
0 Posts
day 3: installed stock heat exchanger, got some hoses connected, and did all the wiring except for ic pump. The wiring took a long time to solder, and wrap up.
pic of the heat exchanger although you can't see it
supercharger put on so I can figure out how I was gonna run my wires.
day 4(tomorrow): no work on car but I will be painting the supercharger if weather permits
pic of the heat exchanger although you can't see it
supercharger put on so I can figure out how I was gonna run my wires.
day 4(tomorrow): no work on car but I will be painting the supercharger if weather permits
#19
Senior Member
iTrader: (1)
good work dude, i told you about the pump,. either way u wire it, it will always blow/suck but depending which peg gets pwr and which is grd, it will blow/suck or suck/blow, i forgot which ones should blow :p like i said, call haza and ask him, he knows
good luck wit it
p.s. dont call me that early ever again...u woke me up hahahaha i dont even remember wtf u wanted :p only call in the PM, AM im most liely asleep
good luck wit it
p.s. dont call me that early ever again...u woke me up hahahaha i dont even remember wtf u wanted :p only call in the PM, AM im most liely asleep
#20
Senior Member
Thread Starter
iTrader: (1)
Join Date: 11-01-05
Location: San Antonio,TX
Posts: 5,446
Likes: 0
Received 0 Likes
on
0 Posts
I don't have haza number!!! I have his house on gps but not his phone.... dude if you tell me when no one is home and I can go get those bumpers, I'll give ya some cash rofl
#22
Senior Member
Thread Starter
iTrader: (1)
Join Date: 11-01-05
Location: San Antonio,TX
Posts: 5,446
Likes: 0
Received 0 Likes
on
0 Posts
friday we started around 7:30pm finished at 1pm
saturday we didn't do anything well I just got all the wiring put together so on sunday we just solder them into place
today we connected all the wiring and installed stock heat exchanger started around noon and stopped at 9pm.... also had to make a few trips to autozone and lowes for some stuff... and a break for dinner and some breaks inbetween as well.
saturday we didn't do anything well I just got all the wiring put together so on sunday we just solder them into place
today we connected all the wiring and installed stock heat exchanger started around noon and stopped at 9pm.... also had to make a few trips to autozone and lowes for some stuff... and a break for dinner and some breaks inbetween as well.
#24
Senior Member
Thread Starter
iTrader: (1)
Join Date: 11-01-05
Location: San Antonio,TX
Posts: 5,446
Likes: 0
Received 0 Likes
on
0 Posts
lol meant 730pm and 1am
oh and a question for yall
http://vids.myspace.com/index.cfm?fu...deoid=52419487
oh and a question for yall
http://vids.myspace.com/index.cfm?fu...deoid=52419487
Last edited by Dragonsfire12345; 02-16-2009 at 01:28 AM. Reason: Automerged Doublepost