Vetteman99

What Turbo do you think i should put on my Black '06 Cobalt ss coupe also if not a turbo intercooler combo what intercooler should i get with it.

3fo893013L

SEARCH!

Nothing out yet and too much development still needs to be done until otherwise.

celicacobalt

are you custom building a kit for yourself? if so i say go witha gt28rs ball bearing turbo and a sparco intercooler that measures the right size to fit then have a shop do all the piping for you, if you want a kit then youll have to wait for hahn racecraft which should be out this month or next i think

g5mike

i have to agree with celicacobalt this one will spool up quickly, and if you have the 2.2 you can expect hp gains in the mid 200hp range

Vetteman99

If you don't have a turbo or super charger would a intake do any thing

mike25

yea the cai just pulls more cold air into it to cool it down so you could see about 10 hp gain

97CIVIC

Wait For The Hahn Turbo Coming Soon!

NJHK

Ball bearing turbos aren't for everyone...

Also ball bearing turbos include more maintenance. If you have to replace the whole cartridge, you might as well buy a new turbo for the price it's going to cost you. Sure, they spool slightly faster but it's nothing that you are guaranteed to need.

And you mean Spearco intercoolers...not Sparco. Any decently made intercooler will work fine...you can find them on ebay for a dime a dozen.

EDIT: If you have a problem with a ball bearing turbo, good luck finding a place that will fix the issue cause alot of shops don't deal with them.

NJHK

You really shouldn't give people guestimations of power increases.

Best answer you can give someone is to put it on and dyno it.

NJHK

The turbocharger itself isn't what determines your power gains...so you in reality can't EXPECT mid 200 HP by just putting a turbo on.

The amount of PSI you're running, the size of the turbo and your a/f mixture are the biggest factors of how much power you'll gain.

Also, spool timing...if you're worried about spool timing, match a turbo to your motor properly. If you don't know how to, get a compressor map and learn how to read one.

Want to learn how to read compressor maps?

NJHK

The turbo itself really depends on what you're looking for as far as spool timing, RPM range and efficiency.

As far as the intercooler, any decently made intercooler will work fine.

Are you planning on building your own kit? If so, read this before you buy anything:

How To: Build your own ECOTEC Turbo Kit

savior

once again, we have been raped by NJHK

Vetteman99

For the hahn turbo what web site is that on

Brian MP5T

No FMIC... Limits you to 4 Psi with a turbine

97CIVIC

I GOT IT OF MY JULY ISSU OF TURBO MAG,, IT MAKES 222.6 HP AND 248.9 TQ, STILL NO PRICE

NJHK

LOL

Once again, you made me giggle...

NJHK

http://www.hahnracecraft.com

zomghax

Awesome thread Adam.

NJHK

Thank you.

FYI: I'll be updating it every so often.

Brian MP5T