UniChip and Turbo Tech Racing needs your help
#1
UniChip and Turbo Tech Racing needs your help
We were contacted by UniChip as we need a photo, here is what they requested:
Unichip wants to make a harness for the cobalts, they think they have the harness already sourced. However they would like to get a picture of the stock ecu next to the plugs for the ecu. This would greatly help the cause. Pics are needed for the 2.0/2.2/2.4
Bottom line they stated this in an email:
"Well, we are looking for a picture of the ecu on a cobalt ss and a non ss cobalt, so we need pics of both, they should look nearly identical if not identical. But basically we need to see if there are 2 or 3 plugs on it"
PM or email me at Aaron@TurboTechRacing.com if you can be of any help
Unichip wants to make a harness for the cobalts, they think they have the harness already sourced. However they would like to get a picture of the stock ecu next to the plugs for the ecu. This would greatly help the cause. Pics are needed for the 2.0/2.2/2.4
Bottom line they stated this in an email:
"Well, we are looking for a picture of the ecu on a cobalt ss and a non ss cobalt, so we need pics of both, they should look nearly identical if not identical. But basically we need to see if there are 2 or 3 plugs on it"
PM or email me at Aaron@TurboTechRacing.com if you can be of any help
#11
Driver side front plastic piece that is curved pull up and you will see your ecu I already sent pics this afternoon to Aaron this is for the 2.4 I have a 2.4 with 3 plugs. I dont know what the 2.2 has I never looked at the ecu when I had my 2.2 anyway it's the plastic curved piece just in front of the red battery cable hook up where the battery feeds the car, even though the battery is in the trunk...
Thread
Thread Starter
Forum
Replies
Last Post