balts with plastidip'd wheels..
#257
New Member
Join Date: 09-05-11
Location: Niagara Falls/NJ
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
#261
Member
Join Date: 07-08-08
Location: Red Deer, Alberta, Canada
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
Well Here are some pics from what I did this weekend.
Before
During
After
Used 4 cans of black Plasti-Dip, 1 can of clear Plasti-Dip (I didn't realize till afterward it was going to be a matte finish, but I liked it anyway, heh), and a partial can of Nite Shades with a coat of clear Plasti-Dip on the taillights.
2 fairly thick coats on the inside part of the wheel, 4 coats on the front face, then a couple coats of the clear Plasti-dip over top. Turned out pretty well I think.
It was a fair bit of work. But worth it in the end.
Looks WAAAAY better than before IMO. haha
Before
During
After
Used 4 cans of black Plasti-Dip, 1 can of clear Plasti-Dip (I didn't realize till afterward it was going to be a matte finish, but I liked it anyway, heh), and a partial can of Nite Shades with a coat of clear Plasti-Dip on the taillights.
2 fairly thick coats on the inside part of the wheel, 4 coats on the front face, then a couple coats of the clear Plasti-dip over top. Turned out pretty well I think.
It was a fair bit of work. But worth it in the end.
Looks WAAAAY better than before IMO. haha
Last edited by PyroSiege; 04-24-2012 at 08:19 PM.
#268
Member
Join Date: 07-08-08
Location: Red Deer, Alberta, Canada
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
Unless, of course, that IS dirt. Then I agree completely. Prep is key to a good finished product.
#271
Well Here are some pics from what I did this weekend.
Before
During
After
Used 4 cans of black Plasti-Dip, 1 can of clear Plasti-Dip (I didn't realize till afterward it was going to be a matte finish, but I liked it anyway, heh), and a partial can of Nite Shades with a coat of clear Plasti-Dip on the taillights.
2 fairly thick coats on the inside part of the wheel, 4 coats on the front face, then a couple coats of the clear Plasti-dip over top. Turned out pretty well I think.
It was a fair bit of work. But worth it in the end.
Looks WAAAAY better than before IMO. haha
Before
During
After
Used 4 cans of black Plasti-Dip, 1 can of clear Plasti-Dip (I didn't realize till afterward it was going to be a matte finish, but I liked it anyway, heh), and a partial can of Nite Shades with a coat of clear Plasti-Dip on the taillights.
2 fairly thick coats on the inside part of the wheel, 4 coats on the front face, then a couple coats of the clear Plasti-dip over top. Turned out pretty well I think.
It was a fair bit of work. But worth it in the end.
Looks WAAAAY better than before IMO. haha