Ok, so I got the eBay halos and there is an LED burnt out on the right side. I thought I saw a post somewhere on this but I ca'nt find it now. Is there any way to fix this?? it's not the halo LED, it's the actual LED on the top of the headlight. I will message the guy who sold them to me, but I'm not taking them back out they were a butt pain to put in. lol. Now, I also need to know how to aim them, does anyone know that? I assume it's the screws on the back of the projectors, but before I start turning screws I want to know for sure.

 

get some leds and replace it. yeah there are screws on the back that move the projector.

 

I made a how to on this.......but it has not been approved yet.



The gold screw on the bottom is your left to right aim for the projector. The silver one on top is your up and down aim for the projector. There is NO aim for the high beams.

 

that's not the headlight I have lol. similar, but not even close in some ways. there are actually four screws around the projector housing, and you're right there is no changing the high beam thing, and I don't have a need to really either. you have the headlights that plug right into your stock harnesses, I opted for the ones I had to wire myself, they were a bigger pain but I liked em more plus I can do what I want with em. Thanks for the info tho!

and as for spyder, I would if I could get to those LED's! that's what I wanna do, but I don't know how to get to em.

 

AHHH ok. Well then I have been no help at all.

 

lol wouldn't say that

 

So its not the one in the halo, but one of the three on the side? Right? If so, they just pull out from behind, just get a firm grip on the rubber boot of the led, and pull. The LED should pull right out. It may be a wiring problem, so make sure all your connections are right. When I installed mine, my highs were not working, or some of my LED's, the problem was that they weren't getting power. If the LED is still not working, message our residing LED Master, mkulrey13. He'll hook you up with what you need.

 

I'll have to check that out. I don't think it's a power issue as nothing else has an issue and the other two lights seem fine. I'm not really sure you can pull them out like that... it looks like there wouldn't be a way to put them back in... I'll have to take a look. perhaps I'll pm mkulrey as well. Thanks!

 

If you have the same new halos as me, then you can not just pull the LED's out. The only way you can get at them is to seperate the lens from the back.