ViSiONZ

Ok I just bought an H11 HID conversion kit for my foglights, I've already put HID's in my 2nd gen projector headlights so I'm kinda familiar with the installation. I just have one noob question... where the heck do I put the two little silver connectors that are just randomly there on the wires?

It was easy to figure it out with my projector headlights because the connectors just plugged into them, but this, I have no idea what to do with.

Here's a couple of pictures of what I'm talking about. CAN ANYONE HELP ME OUT or tell me where/what I do with the silver connector plugs?

HidKidSS

i have hid in my fogs...from what i remember i cut off that rubber part couse you really dont need it as for the 2 connectors in the hid kit they should have sent u the plastic holders that plug into the stock hardness like how you hookd up the ones in your headlight if you dont have the plastic part then email them they left out 2 parts 2 the kit...hope i helpd you out

ViSiONZ

I'm going to cut that rubber cup off. But There is nothing missing from the kit. I have the same kit for my headlights and they didn't come with these "plastic holders" you're talking about. Now I'm just confused.....

HidKidSS

lol ok recap when u did your headlights an on the stock hardness how theres the blue connecter that you had to disconnect? they should have sent u a set like that

ViSiONZ

This is what it looked like when i plugged them into my projector headlights, its not the same as the fog lights. Do you have a link or picture as to what you're talking about? That would help me out alot.

operatic

If the kit did not come with a relay harness. Those two metal pins go into your OEM plug. Match the black plug up with the ground wire and the red with the other wire. You just push the metal pins into the connector and wrap it up with electrical tape.

HidKidSS

wow ur like the 2 person without the true plug n play hid kit but ya im looking for a pic of any hardness 2 send u 2 show u the part your missing or well atless came in my kit that i used

ViSiONZ

It didn't come with a relay harness. Thanks for your help.

operatic

No problem - If those HIDs fail on you, hit me up

ViSiONZ

I will 110%. I will be ordering some off of you soon enough. I want a different color temp for my headlights.

operatic

Oh ya, enjoy the HIDs regardless - one of the best mods ever!!!

ViSiONZ

I will.. But you're sure that's what I do with those connectors? I mean, that's what you do when you don't have a relay harness?

HidKidSS

agree if i do deside 2 go 2 projectors i will also b getting more hids for the hi/lo but i will need the slim ballast 2 hide...no more room under the hood for another set lol

operatic

Without a doubt in my mind partner. They'll go in just like this.
http://img240.imageshack.us/img240/1470/dsc00405mo4.jpg

wisemanonice

where did you get the fog hid kit?

06blackSC

Yup, thats exactly what you do with the wires. It has worked for me.

operatic

He got his kit from eBay, but we are a vendor here on CobaltSS that also sells HID kits

wisemanonice

even for fogs? looking for a plug and play hopefully

operatic

Sent you a PM

wisemanonice

thx.

typo

i just purchased a hid kit is there any modding needed to get the H1 bulbs to fit in the projector housings?

operatic

Nope, but so you know the bulb doesn't go in the way you think it would.