I don't have those kind of problems. mostly just getting the tune ironed out now and upping the boost

 

It helps to hook stuff up right and to read the manual

 

Ain't nobody got time for those!

 

Hey guys, does anyone know where i can get some new springs for a 2007 ss/sc in calgary? I've called several part source and napa stories and they say they have them and its the same spring for every cobalt. Wouldn't the springs for my Fe5 Suspension package be different than the base model cobalt? Also does anyone have any recommendations for new springs?

Thanks!

 

do you need all four?

 

yup, I would like it to be close to the stock ss/sc ride height, maybe 1" lower or so.

 

Aftermarket Springs can be had at mopac, JB's or via the internet. I have stock springs at home and thats about it

 

Jonathan I have my new block so gimme a txt when you wanna come by and see it. BTW my build is gonna start Friday!

 

Another question for you guys. Does anyone know someone who can program key fobs to the car, or a good shop that can do it. I've read a few posts on here saying that some people got it done for free. I called a few of the dealerships here and they say it takes over half an hour and charge $80!

 

Ever done it before. I don't know anyone either. Sorry man

 

herro everybody.

 

Haven't seen you post in a long time. Hows down under land?

 

Good mate, doin FIFO work up in the pilbara. lovin it. should be ready to travel again in about 2 years if my plan works out. south america this time. What new in the berta? was jsut home start of August actually

 

Well the oil industry is struggling, people are still idiots, the ndp are turning this place in to ontario.....so it's hell hahaha

 

well ****. so not missing much. seems rather quiet around here anyways. Just got my shorty back from the panel shop yesterday. ****** minty fresh paint

But... its now a pavement princess.

 

Damn, that looks pretty good!

 

looks wicked Matt!!

 

I miss your Face Matt!!!!!

 

anyone need a set of winter tires? i have a set of basically brand new 205/60R16 Goodyear ultragrip ice wrt tires mounted on 5x110 rims used very lightly for one season, 90% tread on 2 and 95% on 2

looking for $500

 

i don't run 16" tires;
but have you tried kijiji?
this is about the perfect time to list winter tires.

 

So I bought a set of 18" SC wheels for winter wheels. I also bought the 5mm spacers. I fit them on and the wheel seemed to spin freely (I do not remember if I torqued them on though when I test fit). Well then I got the tires mounted and wheels torqued and now I can hear some slight rubbing.. Looks like it is more towards the center of the wheel and the brembo caliper.

Does anybody else run this setup? Any suggestions? Is it possible to machine the inside of the wheel to make it fit?

 

I have LSJ wheels with 5mm spacers I believe with no issues

 

Are they the chrome version or the darker grey ones?

 

Chrome

 

possibly they were not mounted bang on correct...
I'd suggest popping it off, and remounting it.