This is what the guy selling it has listed.


I think that this may be a shifter for a Chevy Cobalt SS/SC or Saturn SS/TC. I acquired it at an auction, so I don't know for sure.

markings: none...

shaft: chrome plated steel...knob is satin finished alloy w/alloy lock out assy....

Shaft measurements:

* it is bowed 3/8"...

* length is 9 3/8"...(w/o knob)

* shaft dia. is 0.467"

* threads read 0.471" & are 3/4" in length...

* 3 7/8" down from top of threads is a shoulder (A) that an o-ring is up against...

* reverse lock out roll pin is 1 1/16" from shoulder (A)

* roll pin slot in shift knob handle is 3/16" x 9/16"

* center of formed lock out arm center is 1/2" from center of slot...

* bottom of lock out arm is 1 1/4" from bottom of slot...

* lock out arm is fastened to bottom of lockout assy. w/3 tinyPhillips screws...

* chrome sphere (B) is 1 5/8" below shoulder (A)

* sphere (B) is 0.560" dia...has a 3/16" hole on side w/allen set screw inside it...

* a 3/4" tapered shaft is on opposing side from set screw...has a 0.395" ball on end of shaft...nylon bushing fits on this...about 1 1/8" w/bushing on shaft...

* @ shaft immediately below sphere (B) it measures 0.543" x 1/8"...tapering down to 0.479" @ the top of the bottom o-ring ... tapers down to 0.473 below o-ring for another 5/8"...where it really tapers down to a 0.395" dia. ball (flat surface on very bottom of ball)

Satin finished alloy shift knob & reverse lock:

* knob measures 1.973"(W) x 2" (L)...has a removable cab that is held in place with an o-ring (no o-ring)

* reverse lockout assembly is alloy except for the formed arm @ bottom of slider..

 

what is the part number on it. google the part number and you will have your answer

 

if i had a part number, i would of done that already, as in the post under the pictures it shows markings as none, thats why i was seeing if anyone could maybe identify it as a certain brand of a sts, by seeing it.

 

does it have a revese lockout?? if so that will narrow it down

 

You bought something without knowing what its for?

Looks like it has a reverse lockout, so its for the SS.

 

^^ i personally did not buy it, some guy has, and is looking to sell it. thats just the information he has from it.

 

You auctioned for a part and didn't know what it was?

 

nope read the post above yours, thats just what the guy has stated in his listing.

 

I'm gonna say without reading it lol short shift kit for the 05 to 10 cobalt ss on ebay

Am I the winner?

 

your guess is as good as mine to if its a sts or not. i was just curious if anyone could identify it, but who in their right mind would bid on an item without knowing what it really was for , thats just people with money and no brains, or just no brains.

 

Looks like it's from a car shifter manufacturer

 

That almost looks like a TWM sts for the 05-10 cobalt ss. But without knowing what exactly its for, i'd just forget you ever saw it unless its only 5 bucks lol

 

i thought it was a twm also, its only 20 bucks thats why, im not really paying attention to it, just more so curious.

 

Well ****, at 20 bucks i'd grab it just to see if it works. If not, its only 20 bucks lol

 

lol, i found out what its from , its just a generic cavalier sts from ebay

http://cgi.ebay.com/ebaymotors/Chevy...Q5fAccessories

 

Cavaliers didn't come with reverse lockout to my knowledge...never really drove a 5spd one tho so I'm probably wrong lol

 

im not to sure either, but it looks the same? then again who knows if thats even the right picture put up on the auction.

 

Cavaliers did have the reverse lockout.