|
Sounds great, many more kits shipping out!
|
I will be prototyping a ky twin disc setup that will be available soon. I had to send them in a flywheel so they could start developing one which I shipped out today.
Btw I've got nearly 100k miles on my ky stg3 clutch. (Twin disc not going on hhr) |
Originally Posted by ATLsilverSS
(Post 7582403)
I will be prototyping a ky twin disc setup that will be available soon. I had to send them in a flywheel so they could start developing one which I shipped out today.
Btw I've got nearly 100k miles on my ky stg3 clutch. (Twin disc not going on hhr) |
More shipping out.
|
Originally Posted by ATLsilverSS
(Post 7582403)
I will be prototyping a ky twin disc setup that will be available soon. I had to send them in a flywheel so they could start developing one which I shipped out today.
Btw I've got nearly 100k miles on my ky stg3 clutch. (Twin disc not going on hhr) I think I will be number 2! |
More in stock and shipping!
|
Mine lasted 3 months before it started making an annoying noise.
After taking it all apart I see the pressure plate was hitting the clutch in two little spots. Looks like there were a couple places that weren't filled down well. So not knowing what was going on in there for sure, I had to get a new clutch and everything... yay... Needless to say I didn't but, nor will I ever buy again, this clutch... Another expensive lesson. |
Not sure the situation, but if it was 90 days, it was still in warranty and would have been covered by KY performance.
More shipped out today. |
Right, cover the cost of taking the trans apart?
Shipping it back? Loaner ride while I wait for all this? Putting the trans back together? All just to do it all over again... Right. sounds like fun. Sign me right up... Also you guys sent me the wrong bolts on my rear brake lines. I've emailed you tried to contact you guys a couple times. No response at all... so... yeah. I'm done. Thanks... |
Originally Posted by nutty21
(Post 7605073)
Right, cover the cost of taking the trans apart?
Shipping it back? Loaner ride while I wait for all this? Putting the trans back together? All just to do it all over again... Right. sounds like fun. Sign me right up... Also you guys sent me the wrong bolts on my rear brake lines. I've emailed you tried to contact you guys a couple times. No response at all... so... yeah. I'm done. Thanks... Also what is you email address you ordered under, I would like to look up your account for your orders. Thanks! Just looked for an account for you, we have no customer from Canada name Jay, and your email address is not in our system. Seems you must not have ordered our clutch kit. At any rate 2 more kits shipped out yesterday/Friday! |
Awesome ride you have there... I'd like to know more about it if you have anything on line. Sleepers are the only way to go.... (and make $$).
Originally Posted by lwpmoon
(Post 7542169)
More questions about torque ratings. I burnt out a spec stage 2+ with 530 ft/lb to the wheels but its only rated for like 400 ft/lb max. Is there any way I could get away with the KY stage 3? I don't want the harshness of a 4 puck. I'm not even sure I want a 6 puck over a full face, but I need the extra strength for 4th gear.
Next question is about weight. How much does the KY stage 3 weight compared to stock. Ever since I've had the spec, it seems like the engine takes for ever to lose rotational speed. I plan on mating my next clutch to a Fidanza aluminum flywheel hoping it will help reduce unnecessary clutch wear during quick shifting this season. I know that a lot of high capacity clutches are heavier, particularly the pressure plate, to provide the extra clamping force. Just curious how much heavier than stock the KY stage 3 is than stock. Last question is about longevity. How many seasons are people generally getting off these clutches? 4 years seems to be the magic number for my current clutch but really only 2 at high load. Traffic defiantly had an impact on it as well. I'm really on the fence with the KY stage 3. I enjoyed my spec stage 2+ even though it started to chatter and make noise during engagement and I'm impressed it went as far as it did. I want something that is steerable and will not mind launching with boost and warm slicks on the other end of a pissed off transmission. Is the KY stage 3 for me? BTW this is going on an f23 cobalt lt. |
Originally Posted by TurboTechRacing
(Post 7605220)
Must be the wrong company, we don't sell bolts for brakes.... Just a FYI. Only brake items we sell is pads and rotors... Please re check your invoice from the company you ordered from.
Also what is you email address you ordered under, I would like to look up your account for your orders. Thanks! Just looked for an account for you, we have no customer from Canada name Jay, and your email address is not in our system. Seems you must not have ordered our clutch kit. At any rate 2 more kits shipped out yesterday/Friday! Was for the brake lines. Shows how piss pour you are at your job considering in this very thread is you saying you shipped my order out for my clutch, but don't have me as a customer... Makes sense. Great company. A1.... Clearly. Rest my case. |
are the twin discs available
|
Originally Posted by nutty21
(Post 7605259)
Yeah, it's your company. Emailed you. You told me to contact support. It's still in my email box here, and then the emails to support in my hotmail.
Was for the brake lines. Shows how piss pour you are at your job considering in this very thread is you saying you shipped my order out for my clutch, but don't have me as a customer... Makes sense. Great company. A1.... Clearly. Rest my case. Found your order Jason, 26734, ordered way back in 2014, you made it sound like you just ordered. Funny thing is you have a 2.0L and we don't carry brake lines for a 2.0L, Nor have we ever had lines for a 2.0L, nor did you ever order anything from us other than a KY stage 3 kit.... Please post a copy of your invoice from these brake lines.... |
Originally Posted by advise
(Post 7605262)
are the twin discs available
|
I think nutty21 is about 2 years too late for his complaint, how come randomly out of the woods now? Also waiting for the twin disk, cause now im debating between getting the twin disk or the stage 3
|
Originally Posted by AKillEaze
(Post 7605355)
I think nutty21 is about 2 years too late for his complaint, how come randomly out of the woods now? Also waiting for the twin disk, cause now im debating between getting the twin disk or the stage 3
Complained back then... Happened to come back to the forum, checked my posts. Came in this one to see what's what. |
Originally Posted by TurboTechRacing
(Post 7605319)
Your name and email address did not match what you ordered under, sorry for that mix up.
Found your order Jason, 26734, ordered way back in 2014, you made it sound like you just ordered. Funny thing is you have a 2.0L and we don't carry brake lines for a 2.0L, Nor have we ever had lines for a 2.0L, nor did you ever order anything from us other than a KY stage 3 kit.... Please post a copy of your invoice from these brake lines.... You don't sell 2.0L brake lines, yet asked my what year my cobalt was. I told you 2008. You asked if my rear routers were vented or not. Plus it says in my signature I have a Cobalt SS, and on top of that it says in the Invoice that they are Cobalt SS brake lines. So how that hell did you sell me brake lines for a 2008 cobalt ss and think think that it wasn't a 2.0??? Front brake lines seem to work fine. Been on there for two years... Oh, but wait, you didn't sell me brake lines, as you say you only sold me a clutch, even through I have PM's from you, and email trail, and the invoice from you.... Seriously... Yet I know you will just keep trying to spin this even more.... So go ahead. Now what's the next excuse? Know you'll have another, cause clearly you couldn't have messed up. Even though you've put your foot in your mouth more than enough already. |
PRIVATE MESSAGES:
nutty21: How much for brake and clutch lines in red to 248 Bellefontaine Road, Middle Porters Lake, NS B3E 1K7? thmotorsports: $169 SHIPPED Let me know how you would like to pay and if you find a better price, we have price match assurance and we beat everyone's pricing! So we would be happy to match and beat any other vendor! If you would like to place an order, send me your paypal email address and I can send you an invoice so you pay with your account OR you can call me. NOTE: PLEASE USE THE Click the image to open in full size. BUTTON SO YOU QUOTE THE PREVIOUS MESSAGE AND SO WE CAN BOTH FOLLOW THE CONVERSATION IN FULL!!! THANK YOU!!! Nutty21: How quick is shipping? thmotorsports: 3-4 days to make it. 7-10 business days to ship to you via USPS Nutty21: Sorry, I lost the posts on these. What issues do these help with again? Right now I'm having to replace my clutch and a bunch of gearings and 5th gear and just a headache. thmotorsports: Steel Brake Lines - How Brake Lines Work | HowStuffWorks Nutty21: Hi, Was more interested in what issues the new clutch line helps prevent as I've been having tranny issues, and wondering if this could have came into play at all. thmotorsports: https://www.cobaltss.net/forums/supp...ly-out-283322/ Nutty21: Hi, nutty21_29@hotmail.com Is my paypal account. If there is anyway to put some kind of rush on it. I'm having my tranny worked on right now, and am waiting on parts for that so would be good to get these in there at the same time. Yeah mine wasn't disengaging it seemed like also. I go to reverse and it'd grind 75% of the time now. Thanks, Jay thmotorsports: Invoice sent. Let me know what year cobalt you have. Nutty21: Hi, It's a 2008. I guess on color options, I didn't see purple as an option, so red I guess? Thanks, Jay thmotorsports: Red is fine. On your 2008, please confirm if you have vented rotors in the rear. This is relevant to the stainless brake line build. Nutty21: Hi, The routers are stock, whatever the 2008's came with. thmotorsports: No.... that will not be enough information. Are they vented? Nutty21: The car's in the shop at the moment, but I called them and they say not vented. Thanks, Jay thmotorsports: k thank you. Nutty21: Hi, Is there a tracking number for this? Thanks, Jay thmotorsports: Jay, Shoot an email over to shipping@thmotorsports.com for an update. We only handle sales from here. Thank you. Nutty21: Hi, We finally got around to putting them on, but for the rear brakes it would appear we have been sent the wrong bolts. Thanks, Jay thmotorsports: Contact customer service via email or call in. We just do sales through PM. thank you. |
EMAIL TRAIL:
To: dwhalen@thmotorsports.com;shipping@t...orsports .com; Hi, We finally got around to putting them on, but for the rear brakes it would appear we have been sent the wrong bolts. Thanks, Jay __________________________________________________ _________ Subject: RE: Your Invoice with THMotorsports.com Date: Thu, 19 Jun 2014 12:01:27 -0300 Hi, Is there a tracking number for this? Thanks, Jay __________________________________________________ _________ To: dwhalen@thmotorsports.com;shipping@thmotorsports.c om; Hi, Is there a tracking number for this? Thanks, Jay __________________________________________________ _________ From: dwhalen@thmotorsports.com 2014-06-13 Dear Jay : Do you want to save 2% off on your next order? Save this invoice and email us a request to add you to the 2% returning customer club free! Please email contact@thmotorsports.com. If you call in your order, be sure to mention that you are a returning customer and want 2% OFF! OPEN THIS INVOICE FOR SPECIAL OFFERS! SHIPPING STATUS: When your order is complete and shipped, you will receive your tracking information. Most Orders ship within 48 hours but some are special order and may take longer if shipping directly from the manufacture. If you have have been waiting for an extended amount of time please log on to Support and open a request for shipping. A representitive will get back to you right away. Sincerely, TH Motorsports 1-800-959-0145 |
INVOICE:
TH Motorsports 5631 Dempster Morton Grove, IL 60053 Date: 6/13/2014 Invoice #: 105166 S.O. No.: 104348 P.O. No.: 101486 Rep: JG Order Date: 6/13/2014 SHPCODE: I Item ITEM: Cobalt SS Brake Line Kit - Red (CHEVY-COBALT-3) Amount: 100.00 Item ITEM: Cobalt Clutch Line -Red (CHEV-COBALT-CL-1) Amount: 69.00 Total: $169.00 |
But you know... never happened...
Never got a response from three emails, and CC'd enough people and distribution lists. No response. Nothing in my junk mail... I gave up. Had other things going on, and was fed up. Anyway, yeah, haven't had great experiences the two times I've bought from you guys. Won't be doing it again obviously. Others can decide for themselves. This was my experience anyway. |
Originally Posted by nutty21
(Post 7605379)
INVOICE:
TH Motorsports 5631 Dempster Morton Grove, IL 60053 Date: 6/13/2014 Invoice #: 105166 S.O. No.: 104348 P.O. No.: 101486 Rep: JG Order Date: 6/13/2014 SHPCODE: I Item ITEM: Cobalt SS Brake Line Kit - Red (CHEVY-COBALT-3) Amount: 100.00 Item ITEM: Cobalt Clutch Line -Red (CHEV-COBALT-CL-1) Amount: 69.00 Total: $169.00 |
Originally Posted by TurboTechRacing
(Post 7605382)
We are NOT THmotorsports! We are Turbo Tech Racing! Now what you have to say?
|
Originally Posted by AKillEaze
(Post 7605391)
LOL. seems like an apology is in order from nutty
I clearly have made an ass of myself, and for that I am sorry. Clutch issue still stands, though I was under the impression this was the same company I got the brake lines from, clearly I was mistaken. Anyway. Sorry for my mistake. I'm going to go and crawl back under my rock now. Cheers, |
| All times are GMT -4. The time now is 07:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands