Bone stock 2009 SS/TC Sedan Results
#1
New Member
Thread Starter
Join Date: 03-30-11
Location: NW Ohio
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Bone stock 2009 SS/TC Sedan Results
I was lucky enough to get a chance to make a few pulls one of my college's dynos this morning. I was pretty happy with the results.
Run 1 was hot off the street. Puffed out a bit of black smoke, hehe. I don't go WOT too often, I guess the PCM had some thinkin to do.
Run 2 was right after Run 1, the only difference was we disconnected the upper airbox to bypass the filter/lower airbox.
Run 3 was with the airbox back together, after a 15 min cooldown.
Run 4 we tried in 3rd gear, the previous three were in 4th.
Max boost I saw on any of the runs was 16psi.
Run 1 was hot off the street. Puffed out a bit of black smoke, hehe. I don't go WOT too often, I guess the PCM had some thinkin to do.
Run 2 was right after Run 1, the only difference was we disconnected the upper airbox to bypass the filter/lower airbox.
Run 3 was with the airbox back together, after a 15 min cooldown.
Run 4 we tried in 3rd gear, the previous three were in 4th.
Max boost I saw on any of the runs was 16psi.
#7
New Member
Thread Starter
Join Date: 03-30-11
Location: NW Ohio
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
#8
Senior Member
Join Date: 09-24-08
Location: new orleans
Posts: 1,045
Likes: 0
Received 0 Likes
on
0 Posts
wait wait wait...so me being tuned and dynoing in 4th gear could have possibly yielded me lower #'s? cuz my numbers def weren't where they should have been, or how the car feels in tuned mode.
#9
Not bad numbers for stock. For somewhat of a comparison I dyno'd 239whp and 237wtq.
Doing it in 4th tends to put more stress on the drivetrain. 3rd gear will tend to produce slightly higher results.
Doing it in 4th tends to put more stress on the drivetrain. 3rd gear will tend to produce slightly higher results.
Thread
Thread Starter
Forum
Replies
Last Post