TVS1900 Question
08-07-2012, 07:30 PM
#1
Junior Member
Thread Starter
Join Date: 09-05-10
Location: South Carolina
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
TVS1900 Question
I've got this build that I'm doing research for, and I think the 1900 might work. I know of the Hot Rod magazine build, and the one euthanasia/100%METH are working on, but other than that, there's not much out there on adapting this blower to the LSJ.
Evidently the only cars the 1900 is specifically designed for are RWD (surprising right?). But the kits available for the RWD cars usually come with one of 2 variations:
1.Front Drive with Front Intake
2. Front Drive with Rear Intake (off at some weird angle)
Nothing like what's on the LSJ
My question is could you use a blower in this type of configuration
By removing the shaft that connects the belt drive to the 1:1 pulleys in the rear, and just run the belt on the actual drive pulley itself?
Or would it be easier to fab a custom intake to come off the passenger side of the car?
Evidently the only cars the 1900 is specifically designed for are RWD (surprising right?). But the kits available for the RWD cars usually come with one of 2 variations:
1.Front Drive with Front Intake
2. Front Drive with Rear Intake (off at some weird angle)
Nothing like what's on the LSJ
My question is could you use a blower in this type of configuration
By removing the shaft that connects the belt drive to the 1:1 pulleys in the rear, and just run the belt on the actual drive pulley itself?
Or would it be easier to fab a custom intake to come off the passenger side of the car?
08-08-2012, 02:58 PM
#4
I'm totally foreign to the SS/SC world, but he couldn't just turn it 90°? What's keep him from mounting it like the M62/TVS1320 and extending the pulley with a fabbed mount, with either a "front" (passenger side) or back (driver side) inlet?
08-08-2012, 05:52 PM
#5
Junior Member
Thread Starter
Join Date: 09-05-10
Location: South Carolina
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Actually I might have found the solution. I found a catalog from 2010 and it seems you can order the blower with whatever drive/intake you need. Now I just hope they still do these kind of orders
08-09-2012, 05:45 PM
#7
Junior Member
Thread Starter
Join Date: 09-05-10
Location: South Carolina
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
^ Yeah, your setup is similar to what I wanna do. I wanna use the ZZP Shortblock + a Fully built/ported head I picked up from a member on here. ZZP Trans (maybe) and TVS1900 (or at least 1.6L) with water/meth.... looking to make at least 450 to the wheels
08-09-2012, 05:54 PM
#8
Senior Member
iTrader: (1)
Join Date: 10-17-10
Location: ft. lewis/ milwaukee, WI
Posts: 4,605
Likes: 0
Received 0 Likes
on
0 Posts
i love my setup its a definately a street monster...no idea wut i dyno never took it but my tuner gave me a pretty good idea..i wont disclose that tho
08-09-2012, 08:37 PM
#9
Junior Member
Thread Starter
Join Date: 09-05-10
Location: South Carolina
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
08-10-2012, 01:52 PM
#11
Senior Member
iTrader: (1)
Join Date: 10-17-10
Location: ft. lewis/ milwaukee, WI
Posts: 4,605
Likes: 0
Received 0 Likes
on
0 Posts
like i said my tuner gave me an idea of wher i am but until i dyno it and get confirmed numbers i wont say nething..i dont wanna be spreading rumors or nething..its my DD neways rain/snow/sun so wutever it makes im happy with it
08-12-2012, 05:04 PM
#14
Junior Member
Thread Starter
Join Date: 09-05-10
Location: South Carolina
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
08-12-2012, 06:54 PM
#15
http://www.youtube.com/watch?v=jWluKsz7qnw
http://www.youtube.com/watch?v=Omwpf...2&feature=plcp
http://www.youtube.com/watch?v=QlcH7...9&feature=plcp
Last edited by TStone; 08-12-2012 at 06:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post
