Forced Induction Turbos/Superchargers

what to use for meth kit?

Old Dec 13, 2008 | 03:00 AM
  #1  
andrew97's Avatar
Thread Starter
Member
 
Joined: 09-19-06
Posts: 302
Likes: 0
From: Jamison, PA
what to use for meth kit?

I recently just bought a meth kit from a member on here. Im trying to figure out what the safest solution to use to spray into the motor is. I know you can use some kind of window washer fluid but i dont know what my best bet would be to use with out any tuning or anything. Please help with some insight on this.
Reply
Old Dec 13, 2008 | 09:34 AM
  #2  
lsjwannabe's Avatar
Senior Member
iTrader: (1)
 
Joined: 01-23-06
Posts: 10,731
Likes: 0
From: on here
Without any tuning do not run it at all. It will make the car run more rich and make the car run like ****. A tune is a must with meth.
Reply
Old Dec 13, 2008 | 02:06 PM
  #3  
AIS's Avatar
AIS
Non Authorized / Non-Supporting
 
Joined: 10-17-07
Posts: 488
Likes: 0
From: Columbus, OH
Originally Posted by andrew97
I recently just bought a meth kit from a member on here. Im trying to figure out what the safest solution to use to spray into the motor is. I know you can use some kind of window washer fluid but i dont know what my best bet would be to use with out any tuning or anything. Please help with some insight on this.
Not trying to contradict what another vendor is suggesting. I personally would actually go right ahead and install and run it even without a tune. If you run a small percentage of methanol (20% or less) or pure water you'll be just fine running this with a stock tune. All it's going to do is make your tune extremely conservative. Surely you could run more timing and lean out the air fuel with the meth system. But if you don't you'll be just fine.

Your not going to make any additional horsepower without tuning for it. Yet still, your going to get the added engine safety with the increased octane, reduced cylinder temperatures etc..

Do you happen to know what nozzle you have?

Rodney
Reply
Old Dec 13, 2008 | 02:12 PM
  #4  
andrew97's Avatar
Thread Starter
Member
 
Joined: 09-19-06
Posts: 302
Likes: 0
From: Jamison, PA
to be honest i totally forget what nozzle i have, but i get it monday so i will post up here and let yo know what size it is. Thanks for the info about it!
Reply
Old Dec 13, 2008 | 02:29 PM
  #5  
lsjwannabe's Avatar
Senior Member
iTrader: (1)
 
Joined: 01-23-06
Posts: 10,731
Likes: 0
From: on here
Originally Posted by AIS
Not trying to contradict what another vendor is suggesting. I personally would actually go right ahead and install and run it even without a tune. If you run a small percentage of methanol (20% or less) or pure water you'll be just fine running this with a stock tune. All it's going to do is make your tune extremely conservative. Surely you could run more timing and lean out the air fuel with the meth system. But if you don't you'll be just fine.

Your not going to make any additional horsepower without tuning for it. Yet still, your going to get the added engine safety with the increased octane, reduced cylinder temperatures etc..

Do you happen to know what nozzle you have?

Rodney
You are aware that a stock tune runs well into the 10's like 10.0 for a afr. I can't see making it more rich being helpful.

Get the tune trust me, i've ran meth for years your car will just bog even with washer fluid.
Reply
Old Dec 13, 2008 | 02:32 PM
  #6  
Area47's Avatar
Rent me! per hour
 
Joined: 03-22-07
Posts: 24,161
Likes: 20
From: Still fixing others mistakes.
9.6 afr on a stock tune is awesome with -20 windshield fluid!

lawl.

you don't want the afr to change? don't want to tune? take a gallon of water and add one bottle of heet.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KMO43
Front Page News
33
Jan 12, 2016 12:01 AM
ineedacobaltss
Parts
16
Nov 7, 2015 02:25 PM
dennis69
Appearance
9
Oct 20, 2015 04:49 PM
yellow dragon
Problems/Service/Maintenance
0
Sep 28, 2015 09:49 PM
KMO43
Featured Car Showcase
37
Sep 27, 2015 08:53 PM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 12:27 AM.