i got some mounts in the mail from 2 different websites. one of the polymounts is cut in half and the other one is whole... is that how it is supposed to be?

 

Cut in half doesn't sound good to me! Pics?

 

doesn't sound right. pics?

 

standby

one is wider than the other... maybe i got a motor polymount...?

 

Trans mounts are both round.

 

 

Those are trans mounts! strange the ones I bought were both like the red one!
Wonder why they are different?

 

hmmm
why the black one way bigger? and it has a bigger lip too. way bigger

i am feeling them and the red one is softer. the black one is pretty hard but i can still barley dig a fingernail in there

 

okay I’m not the best at this but is it a possibility that the one that’s cut will give the tranny the hold it need’s but allow it to flex a bit so it would minimize the vibration one would get.

 

I think that the bigger one is for the front mount but I have yet to see a black one.

 

maybe... but why is one bigger than the other? is the motor mount and tranny mount the same size?

 

they may have shipped you the wrong part too, did the ad give a picture of the mount and it looked like that?

 

The motor mount looks totally different. Those are trany mounts. I am going to take back what I said earlier and say that the big one goes in the back by the exhaust on the passenger side.

 

or maybe its made for a for an automatic?? the ttr website has a link to a non prothane kit. and the black one definitely doesnt feel soft
http://www.turbotechracing.com/produ...idproduct=5068

 

Thats probably what it is. Did you order them from TTR?

 

yea.

 

Just call them tomorrow and tell them whats up. Did you also order a motor mount?

 

thats what i was asking. the motor mount takes a polymount too right? so i was wondering if they are different sizes

 

Here is what the engine mount should look like. My friend did this how-to.

https://www.cobaltss.net/forums/how-guide-43/how-install-turbo-tech-racing-poly-engine-mount-49773/

He also has installed the trans mounts so if you have any questions he would be a good guy to ask.

 

its square??

 

The engine mount on the passenger side is, but the two tranny mounts are round and should both be like the red one pictured. Call TTR and get a new one sent!

 

they are both exactly the same size.

since you got them from 2 different companies, they're 2 different designs. the only thing that really looks bigger on the black ones is the lip. that could be good, maybe that lip helps hold it in place. there's more much when you connect the mount, so maybe that big lip takes up the extra space? and is it actually cut in half all the way? if so, i bet it's to make it easier to install.

 

i am guess those are made like that to have the install easier but those might be for an automatic i know there is a difference in the auto and manuals

 

you know. you guys are probably right. im thinking its cut in half so you can install each half on each side by easily pressing it in with out having to cut the lip!