Stock Exhaust Size???
#5
New Member
Join Date: 01-18-07
Location: Salt Lake City, Utah
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
there's a lot of info regarding sizing on the 2.0 and 2.2, but does anyone know the pipe sizes fore the 2.4? the stock exhaust manifold outlet is 2.25 unless i'm mistaken. anyone have a bit more info?
#7
Senior Member
Join Date: 02-09-06
Location: Abita Springs, Louisiana
Posts: 626
Likes: 0
Received 0 Likes
on
0 Posts
The downpipe flange is 2.5" by the accordian flex section, but quickly narrows to 2" at the cat.
The resonator is 2" id through out it's length. From the resonator to the rear axle is 2.25". From there it narrows to 2" till it enters the muffler.
I just measured it, so I know these measurements are accurate.
#8
New Member
The manifold of the 2.4 narrows down to less than 1 3/4" at its most restrictive part (by the o2 sensor) before expanding again to 2 1/4" as it connects to the downpipe.
The downpipe flange is 2.5" by the accordian flex section, but quickly narrows to 2" at the cat.
The resonator is 2" id through out it's length. From the resonator to the rear axle is 2.25". From there it narrows to 2" till it enters the muffler.
I just measured it, so I know these measurements are accurate.
The downpipe flange is 2.5" by the accordian flex section, but quickly narrows to 2" at the cat.
The resonator is 2" id through out it's length. From the resonator to the rear axle is 2.25". From there it narrows to 2" till it enters the muffler.
I just measured it, so I know these measurements are accurate.
has anyone on here ever fabricated a new flange onto the stock manifold to line up with an ss downpipe?
Thread
Thread Starter
Forum
Replies
Last Post