Nfamous60

iTrader: (11)

well i was looking at meth kits comparing the prices, and Cooling mist has one of the best kits on the market but i cant see spending $700 when i could just get the 5th injector kit so i went with the devilSown stage 2 kit, But my point of this thread is Snow performance has a kit but they sell a additive for their mixture, think its nitro methane and i wanted to kno if those running meth kits are using it or have used it.

Link for reference:
Snow Performance : Nitro Booster

Kit I'm looking at link:
http://www.coolingmist.com/pagedispl...ystemx&picid=3

Vander Nars

iTrader: (5)

n4learning!

Murdered SS

iTrader: (4)

^^^This

Omnigear

iTrader: (4)

cheaper to get it by pieces, there is a how to on google

Nfamous60

iTrader: (11)

the devilsown kits is 375, only thing is the cooling mist comes with a fault display and automatic cut off

Link for reference:
Universal VC2 Autolearn (BOOST/VAC/MAF)

Omnigear

iTrader: (4)

dont need cut off , thats what the check valve is for... your goin to blow the engine if meth is not pumping during wot anyways =p


talk to 100%meth if your gettin a kit. if not source the parts out.

07MetallicSC

iTrader: (16)

I have a snow performance kit and have never heard of the additive. i had msged the owner before buying, and even he recommended washer fluid and three bottles of yellow heet per gallon over the boost juice they sell. ill have to msg him again about this. been running it this way for 4 years

Nfamous60

iTrader: (11)

i left the lonk of the additive its directly from their website, i was online looking at them yesterday comparing
OMNIGEAR; never heard of 100% meth will look that up tonight and post my findings and compare so far i like what i see from the devilsown kit.

riceburner

iTrader: (66)

im running the devilsown progressive kit, just putting straight boost juice in it by the gallon

TStone

iTrader: (2)

100%meth is a person on the forums

Nfamous60

iTrader: (11)

^^^ OH lol may bad never seen the username on here

Riceburner how you like the kit? what would you suggest

Omnigear

iTrader: (4)

100%meth is a user here

06cobalt racer

iTrader: (11)

my kit is a mix of cooling mist parts and devils own parts. 2.5 gallon trunk mount kit

victory_red_SS

iTrader: (2)

My kit is a Devils Own kit as well I have another one for the project. I buy Methyl Hydrate that I run 1:1 with water. I pay $10/gal so it ends up being $5.00/gal to run. A few other members out here also use the same stuff. Methyl hydrate is 99.9% pure alcohol.

Nfamous60

iTrader: (11)

^^ sweet thanks for the info will look those up and see the cost of piecing a kit together but devilsown is at the top for pricing and from wut im readin on reviews a gud quality.