KC area random talk thread
lol well jackalope had a how to. he filled it in the holes with the magna steel, then he used a D cell battery to roll it on make it flucsh then took off the excess material. got some color matched paint and paintedd it after it dried. after the paint drys use scratch remover on it and it looked really good
New Member
Joined: 10-29-06
Posts: 9
Likes: 0
From: heath springs
I was wondering what anyone would say about this. I have a audiobahn aw1005n 900 watt rms 1800 peak. I have a mtx 3000 watt max amp but I am only going to push 1000 watts to the sub max. Does any one know if it would be ok to have this set up and use the factory bbox for the sub?? any help would be great thx.
New Member
Joined: 10-29-06
Posts: 9
Likes: 0
From: heath springs
the factory box in the trunks of ss/sc the plastic pioneer. this is the combination i would like to use in junction with the factory box. audiobahn aw1005n 1800 watt max dual voice coil 2 ohm ported box recommended at .60 to 2.35 cubic feet. the amp is mtx ta81001rb 3000 watt max at 1 ohm. you can only wire a the speaker i have at 4 ohms 500 watt rms.
Thread Starter
Senior Member
Joined: 08-15-08
Posts: 2,878
Likes: 0
From: Lee's Summit MO
penut butter jelly time penut butter jelly time that thread was sick huh? going to be nicer on the thread im going to go for thread of the year can you guys help me think of something to make me look completely retarded like the supercharger reverse thing
It seemed kinda daunting at first but after i heated it up a bit so i could see the sticky stuff and then i just cut it with a razor blade... they used alot of glue though... I might take your offer on the magna steel. 
