wisconsin car club (balts and ions)
Senior Member
Joined: 03-31-07
Posts: 1,294
Likes: 0
From: Milwaukee, WI
well as of right now im sitting at work waiting till 2:30 to come around so i can go home and finish where I left off on my car... all thats left is to tighten the passanger side axle nut, put the wheels back on, drop her back on the ground, and go take a ride. So my car will be up and running for me when i go to work tonight. I got pics of the busted axle and I will be cutting open the boots to get better pics. so for now I wait lol
Sweet!! Since you are in my mom bed your only like 5 mins away!! jk
Where you at?
There is a shop in GB called Beyound Redline. They have HPT and an awd Dyno. I called them and they said they have never tuned an LSJ before. So I was hoping to find somone who already has.
Where you at?
There is a shop in GB called Beyound Redline. They have HPT and an awd Dyno. I called them and they said they have never tuned an LSJ before. So I was hoping to find somone who already has.
Last edited by ebristol; Oct 25, 2007 at 11:49 AM. Reason: Automerged Doublepost
Senior Member
Joined: 03-31-07
Posts: 1,294
Likes: 0
From: Milwaukee, WI
Sweet!! Since you are in my mom bed your only like 5 mins away!! jk
Where you at?
There is a shop in GB called Beyound Redline. They have HPT and an awd Dyno. I called them and they said they have never tuned an LSJ before. So I was hoping to find somone who already has.
Where you at?
There is a shop in GB called Beyound Redline. They have HPT and an awd Dyno. I called them and they said they have never tuned an LSJ before. So I was hoping to find somone who already has.
Junior Member
Joined: 02-10-07
Posts: 440
Likes: 0
From: Hartford, Wisconsin
hey so my new address is 1021 e hamilton st in milwuakee. i got a whole house 2 floors when i move in i will take some pics and then yes jesse we can have a team rev power hour cus jordan forgot where is dick is it really went inside his body and became a vajayjay because he kept saying he would have one and never did. so...
hey everybody Let me know what would work best for everybody for a weekend meet being on one of these Saturday nights (Nov 3rd, Nov 10th ,or Nov 17th) I was thinking of having everyone come out to hwy and we could all decide on a place to eat and just have a nice little get together, take some pic's, nothing to much just something before the end of the yr, or we could make it a Saturday afternoon and then maybe we could all take a cruse out to place where I get the rev decals and everyone that doesn’t have them can get them being 12 for sides(2) and 18for front banner and another 5 for install. now I would need to know a date that works best for all of use so I can tell my guy troy when we would also be coming cause I don’t want to have all of us go out there and him not no bout it and be like surprise. so let me know. Email me DEREKBIGGS2002@yahoo.com or post on here and some one that has my number can get to me or I’ll give it out in a email
P.s. i wounder how many people are going hey derek posted a post oh snaps ha-ha
Last edited by OneCOLDBIZL272; Oct 25, 2007 at 09:49 PM. Reason: Automerged Doublepost
i'd like to see those pic of the broken axles curt
hey everybody Let me know what would work best for everybody for a weekend meet being on one of these Saturday nights (Nov 3rd, Nov 10th ,or Nov 17th) I was thinking of having everyone come out to hwy and we could all decide on a place to eat and just have a nice little get together, take some pic's, nothing to much just something before the end of the yr, or we could make it a Saturday afternoon and then maybe we could all take a cruse out to place where I get the rev decals and everyone that doesn’t have them can get them being 12 for sides(2) and 18for front banner and another 5 for install. now I would need to know a date that works best for all of use so I can tell my guy troy when we would also be coming cause I don’t want to have all of us go out there and him not no bout it and be like surprise. so let me know. Email me DEREKBIGGS2002@yahoo.com or post on here and some one that has my number can get to me or I’ll give it out in a email
P.s. i wounder how many people are going hey derek posted a post oh snaps ha-ha
hey everybody Let me know what would work best for everybody for a weekend meet being on one of these Saturday nights (Nov 3rd, Nov 10th ,or Nov 17th) I was thinking of having everyone come out to hwy and we could all decide on a place to eat and just have a nice little get together, take some pic's, nothing to much just something before the end of the yr, or we could make it a Saturday afternoon and then maybe we could all take a cruse out to place where I get the rev decals and everyone that doesn’t have them can get them being 12 for sides(2) and 18for front banner and another 5 for install. now I would need to know a date that works best for all of use so I can tell my guy troy when we would also be coming cause I don’t want to have all of us go out there and him not no bout it and be like surprise. so let me know. Email me DEREKBIGGS2002@yahoo.com or post on here and some one that has my number can get to me or I’ll give it out in a email
P.s. i wounder how many people are going hey derek posted a post oh snaps ha-ha
The 10th is good but the whole idea of everyone going to get decals from Troy isn't the best cause there is very little parking.
Senior Member
Joined: 03-31-07
Posts: 1,294
Likes: 0
From: Milwaukee, WI
after looking at the axles the driver side completely snapped.... if it would of held up for a few more seconds they both would of snapped at the same time. the passanger side axle shows evidence of twisting close to the inner cup.
heres a pic of the broken one
and the rest are just pics comparing stock to the DSS stage 2
I would like to also add that ive noticed that the stage 2 axles help control wheel hop a bit
on the stock axles if i would dump the clutch at ALL it would wheel hop instantly.... yesterday after getting it completely together I took it for a spin and laid down some solid rubber and poped it into second for at least 5 car lengths from a ebrake stand.... I would of kept going but it wanted to start hopping so I let off before it would
all these pics were taken with my motorola Q pda smart phone if anyone is wondering
heres a pic of the broken one
and the rest are just pics comparing stock to the DSS stage 2
I would like to also add that ive noticed that the stage 2 axles help control wheel hop a bit
on the stock axles if i would dump the clutch at ALL it would wheel hop instantly.... yesterday after getting it completely together I took it for a spin and laid down some solid rubber and poped it into second for at least 5 car lengths from a ebrake stand.... I would of kept going but it wanted to start hopping so I let off before it would
all these pics were taken with my motorola Q pda smart phone if anyone is wondering
Last edited by Z Speed; Oct 26, 2007 at 11:00 AM.
Senior Member
Joined: 03-31-07
Posts: 1,294
Likes: 0
From: Milwaukee, WI
I would of only taken me about a hour and a half from start to finish.... if it werent for my drain and fill plugs being over tight and them stupid ass retaining clips on the the brake rotors from the assembly line i would of pulled it off. For some reason I had 3 of them retaining clips on my rotors on both sides.....
all in all its easy to do
all in all its easy to do
good for you but gay lol
Hey everyone Me again I guess this make 3 post now it actually more like bout 8 not to brag or anything ha-ha but I know that a few people voted on the 10th I have lot more people say they rather do the 17th so I'm sorry for those that wanted it to be on the 10th least its bout 20 days away so you can hopefully change you time frames of event that you have going on so far here's the plan for the even we would all meet up at Culvers on hwy 100 between the hours off 12p.m. and 1p.m that gives anyone that’s going to show up on hour of lead way to come at 1p.m. we well venture out to Street graphix, which is maybe 20mins away from hwy. at that time well will come up with a place to eat when we are all done with the decals and head from there. Note decals will cost you 12buck for both sides and 18buck for the front unless you have it double layered then that’s going to be more so everyone know the ball park price he does take credit card and the parking lot is small yes mike I know but we can park on the grass if we have too. he wont have a problem its a little bigger that we all think. SO NOV 17th EVERYONE NEXT TEAM REV MEET 12p.m. 1p.m meet at Culvers in West Allis on hwy 100 just south of Greenfield street. questions email me DEREKBIGGS2002@yahoo.com. I'm going to call Troy and tell him were going to be there some time between 1p.m 1:30p.m. if it rains were still doing the meet if it snows is the only way we wouldnt so everyone knows p.s. it will cost 5 bucks to have the stickers on less you want to do them your self but if you screw it up you have to buy another one if you pay the 5 and he messes it up well make a new one at no charge so I say pay the extra 5 it will pay off.
