figured out and fixed the problem with my car this morning all is good. Guys that were there, remember I said it's not reading the primary o2? well when I went to do it thurs I unplugged it, coudn't find my o2 socket, and forgot to plug it back in... lol. new sensor installed this morning and car is running like a champ... no more 11:1 afr at idle... lol

Mezzano, I want a rematch, my car was breaking up bad, but it still pulled to 145 mph last night.... but you were out on my ass... that damn vette is a monster, but with my 8:1 afr's car just wasn't pulling

 

yeah it wasn't fair at all I got the hit and was in front plus like you said your car was fucked up. First and second I was fighting for traction but once in third the car was pulling like crazy then to fourth look down and im at 150. I was like **** so i hit the brakes quickly and forgot I was in the middle lane, car ******* pulled left and right like crazy. Then there was that cop too but I was down to 70 by the time I passed him. Got lucky I didn't decide to stay in it till 180.

 

lol.... I passed that cop doing 80 didn't even see him. But he was already slowing down to make a u-turn. You heading up tonight? I'm pickin up BT around 9:45 and heading out

 

dam did you get any of that on Tape cause i sure as hell wanna see that.. what time did you guys get kicked out last night ?

 

I might be heading up, not sure if anyone is doing anything around me. Got work to do in the apartment as well. Plus I didn't go to bed until 5 and was up for work at 7:30 so it's likely just a matter of time before i pass out but we'll see what happens.

 

damn bro... .f that get your rest on. Nothing much going on... only staying out for a little bit anyway. gotta get up early tomorrow

 

anyone doing captree 2morrow?

 

nope.... srt picnic thing tomorrow all day

 

we gotta get a cobalt picnic on .. I'll bring the BBQ

 

Sorry man wasn't meant as a bad statement to you dude. You are a customer and I need feedback like that to tell me what's going on. I talked to cobaltic last night and he told me what was going on with your car and I'm trying to have it figured out for you this weekend. I just said it would nice if I lived closer to you guys so it would be a bit easier for me to fix/take care of what needs to be done. I was in a bit of a shitty mood yesterday being that my car hasn't been right and I've been trying to get a chance to fix it for weeks and never get a chance anymore. But all is fixed today and **** is running good again, even got a chance to wash the car, even had time to claybar the hood and fender lol.

I do not mind helping you out. But every post I see from you you keep saying your car is running like crap/ass or whatnot. Which it isn't. Talk to me, don't post that kind of crap up. As I said I don't mind helping you out, but posts like that make me look bad and I don't like that. I can do that on my own lol. Just remember this software and credits has cost me a lot of money and I"m not here to be a cobalt charity. I help out when I can, but I also treat this as my side business since my real job pays dick, and I"m trying to get my car finished sometime this summer. I hate being a dick about things, but I was pretty pissed off yesterday due to a few things going on. Read my above reply for that. But anyway, I haven't had a chance to really go through things for your car yet, but hopefully this week I'll have it figured out. Just need to get some real logs in this time with my laptop.
Anyway I''ll be up at DPA tonight if you want to roll through for me to check out the car

 

paul i tried callin u 2nite, to let u know wuts goin on with the car. i guess it learned the tune. my cel has not been on for 3 days or my t/c light till just till tonight. i pulled over turned the car off and it was off. umm the only thing is the shifting is like from 1st to 2nd. its 2nd to 3rd its shifts higher then the other gears. maybe if ur around this upcoming week ill take a trip out by u and just to fix up that. other than that ill be gettin the tranny cooler next week, if joe gets his car back and running..him and i are going to order one together. parents dont know bout the mods..lol. except the intake cuz its loud. also im lookin for better rotors...any suggestions...and u think its easy to install?

paul i tried callin u 2nite, to let u know wuts goin on with the car. i guess it learned the tune. my cel has not been on for 3 days or my t/c light till just till tonight. i pulled over turned the car off and it was off. umm the only thing is the shifting is like from 1st to 2nd. its 2nd to 3rd its shifts higher then the other gears. maybe if ur around this upcoming week ill take a trip out by u and just to fix up that. other than that ill be gettin the tranny cooler next week, if joe gets his car back and running..him and i are going to order one together. parents dont know bout the mods..lol. except the intake cuz its loud. also im lookin for better rotors...any suggestions...and u think its easy to install? dont worry man. ive had rough days too...and the posts were yeah uncalled for..im was lookin for some other help..but yes ur the man and we all know that...BCP is a god...lol. hit me during the week bro.

 

im there from like 8 to 10 or 11pm where is this other place that you guys are hanging out at??

 

deer park ave (rt 231)

 

where is there like a stop you guys are always at and about what time cause ill come out there this friday if knowone wants to come to bellmore

 

LIE or Souther State to RT 231 South or North respectively. Go to the intersection with the McDonalds in a big shopping center with a Hess station just north or it. I think there's a Walbaums in there too. Fridays ~ 10 PM

 

sooo.. Bald hill tonight anyone going .. ???

 

so no takers for bellmore huh? i guess ill go out to deer park on friday!!

 

Wheres Bald Hill at again? I don't feel like searching through all the pages.

 

I'll only be making a few appearences out there this year (bald hill) since it takes me like 3 hr's to get there from my job.

Also my balt is gonna be down for a while. the s/c is finally starting to let go. You don't even want to hear the noises it's making... f'n scary. But I'll finish the uber port job and I'll be building it with the ceramic ball bearing setup and new needle bearings. So when I go turbo I'll have a 20k rpm setup for sale (can you say 2.35 pulley) Now that's two I have to do now, I'm also building one for mezzano. let the fun begin

 

Damnnnn. 20K RPM. How much does that SC build run man?

 

Since i don't have work anymore i will probably going down tonight. See you there?

 

Speaking of which...Cobalt down!

 

We gotta get more peeps ... Bald hill is on 83 by the Memorial.. off Bicycle path.. take sunrise or LIE to 83 north

 

im on break rite now from work. im out at 8..looks like i wont be coming out..ill have to try to get to dpa this weekend...

 

I'll be charging btwn $400-500 per blower depending on if you want a port and polish on it too.

Yeah balt is down, my needle bearings finally gave up on life. Wish I had remembered to repack em before hand lol. Oh well that's what spares are for anyway. Just ordered new needle bearings and a case of s/c grease and oil for future rebuilds... just wish it held together the 2-3 more weeks I needed until I went turbo. But **** happens what can I say