North Pacific WA and OR

Time for a new NW list...

Thread Tools
 
Search this Thread
 
Old Jun 18, 2009 | 01:13 AM
  #51  
NWAE Cobalt's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: 07-27-07
Posts: 17,332
Likes: 1
From: Puyallup, WA
Originally Posted by Cobaltss/TC
I believe that is the guy who is now helping Dan with development on the Intake at CIA
i think that is actually andy lol, sport red tintcoat sedan around here

Originally Posted by mr84monte
Nope, not helping.....I offered the car up for the SRI if he needed a tester or whatever but I haven't heard anything.

NWAE- If you've seen me, it would be by chance, I've only taken it out to shops to have work done on it. A month old and still have 151 miles.
seriously??? DRIVE IT!!!!!

Last edited by NWAE Cobalt; Jun 18, 2009 at 01:13 AM. Reason: Automerged Doublepost
Reply
Old Jun 18, 2009 | 10:35 AM
  #52  
junedog1975's Avatar
New Member
 
Joined: 06-12-09
Posts: 42
Likes: 0
From: Shoreline,WA
Hi, Guys !!
I,m new to this site. My name is Jerry and I have a Summit White 4dr LS with 20% tint,Custom wing,color-matched mirrors and grille! This is one smooth car! I,m behind on the times with digi-pics, but you will see this car at the meets! I'm hoping I can get endorsed to put my car in the show-circuits!
I plan to put a body-lip kit, euro-lights, LED tails, 18" Wheel and Tire pkg "Black Wheels" Thats the Exterior!! The interior will have two-tone leather kit and new color gauges! with MOMO upgrade on the
shifter, Steering wheel, and E-Brake!
Any other suggestions Guys???
Reply
Old Jun 18, 2009 | 11:05 AM
  #53  
NWAE Cobalt's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: 07-27-07
Posts: 17,332
Likes: 1
From: Puyallup, WA
Originally Posted by junedog1975
Hi, Guys !!
I,m new to this site. My name is Jerry and I have a Summit White 4dr LS with 20% tint,Custom wing,color-matched mirrors and grille! This is one smooth car! I,m behind on the times with digi-pics, but you will see this car at the meets! I'm hoping I can get endorsed to put my car in the show-circuits!
I plan to put a body-lip kit, euro-lights, LED tails, 18" Wheel and Tire pkg "Black Wheels" Thats the Exterior!! The interior will have two-tone leather kit and new color gauges! with MOMO upgrade on the
shifter, Steering wheel, and E-Brake!
Any other suggestions Guys???
Lots of stuff you can do to spruce it up, you should come out to a meet for some ideas
Reply
Old Jun 18, 2009 | 12:45 PM
  #54  
warrenb213's Avatar
Senior Member
 
Joined: 09-09-07
Posts: 1,377
Likes: 0
From: Vancouver, WA
agreed with nwae
Reply
Old Jun 19, 2009 | 12:53 AM
  #55  
scagnetti76's Avatar
Senior Member
 
Joined: 11-05-07
Posts: 802
Likes: 1
From: Helena Montana
Originally Posted by junedog1975
Hi, Guys !!
I,m new to this site. My name is Jerry and I have a Summit White 4dr LS with 20% tint,Custom wing,color-matched mirrors and grille! This is one smooth car! I,m behind on the times with digi-pics, but you will see this car at the meets! I'm hoping I can get endorsed to put my car in the show-circuits!
I plan to put a body-lip kit, euro-lights, LED tails, 18" Wheel and Tire pkg "Black Wheels" Thats the Exterior!! The interior will have two-tone leather kit and new color gauges! with MOMO upgrade on the
shifter, Steering wheel, and E-Brake!
Any other suggestions Guys???
welcome jerry!
like suggested, come to the upcoming meet, there will be MORE than enough ideas!
Reply
Old Jun 19, 2009 | 12:55 AM
  #56  
NWAE Cobalt's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: 07-27-07
Posts: 17,332
Likes: 1
From: Puyallup, WA
Originally Posted by scagnetti76
welcome jerry!
like suggested, come to the upcoming meet, there will be MORE than enough ideas!
hows the finger???
Reply
Old Jun 19, 2009 | 01:05 AM
  #57  
chevyLSchik's Avatar
Senior Member
 
Joined: 10-07-07
Posts: 8,512
Likes: 0
From: Auburn,WA
what? another summit white? nooooo
Reply
Old Jun 19, 2009 | 01:06 AM
  #58  
NWAE Cobalt's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: 07-27-07
Posts: 17,332
Likes: 1
From: Puyallup, WA
Originally Posted by chevyLSchik
what? another summit white? nooooo
yup yup
Reply
Old Jun 19, 2009 | 01:39 AM
  #59  
mr84monte's Avatar
Junior Member
 
Joined: 10-28-08
Posts: 472
Likes: 0
From: Milton WA
Originally Posted by chevyLSchik
what? another summit white? nooooo
I think it was written into my genes that I must have white cars sorry. All my Super Sports have been white and I've had two other white cars besides that (this makes 6 white cars for me). Tried to get my Focus in white, but at the time it wasn't worth $2k extra, but I went all out on this one and prb paid $6k extra for white (since Auburn had three on the lot with the options I wanted only not white) I bet they'd do a great deal on the red one they have because it's been there at least since Nov.
Reply
Old Jun 19, 2009 | 01:41 AM
  #60  
NWAE Cobalt's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: 07-27-07
Posts: 17,332
Likes: 1
From: Puyallup, WA
lol, ive sat in that car haha
Reply
Old Jun 19, 2009 | 12:01 PM
  #61  
warrenb213's Avatar
Senior Member
 
Joined: 09-09-07
Posts: 1,377
Likes: 0
From: Vancouver, WA
*hehe haha hoho* I have the only laser blue in the group I guess!
Reply
Old Jun 19, 2009 | 01:54 PM
  #62  
chevyLSchik's Avatar
Senior Member
 
Joined: 10-07-07
Posts: 8,512
Likes: 0
From: Auburn,WA
i was the only summit white but thats cool that there is another one. i wont feel so alone at the meets now! i hated that my car was white for awhile, i mean i had the dealership try to talk me into my car for two hours and i told them ok, fine...you tint the windows and i'll buy it
Reply
Old Jun 20, 2009 | 10:37 AM
  #63  
junedog1975's Avatar
New Member
 
Joined: 06-12-09
Posts: 42
Likes: 0
From: Shoreline,WA
Hey!
Well, I was going to get the ANZO headlight upgrade, but i heard some of the LEDs in the Lights break or just dont work !! So, I,m going to go a different route! My headlights will be painted the same color as my car! All the chrome housing except a fine trim around the headlight and turn signal! I'm also going to do that to my tailights too!! But on the rears it's going to look more like the coupe! I think this project is going to be SICK!! You guys will see it at the meet! I might not have my rims on by the meet, considering I also have to lower the car too!! I'm plannig to put MSR 65 18" black with polished lip and dropping the car about 2" to close the wheel gap! Does this sound good so far!
Reply
Old Jun 20, 2009 | 11:47 AM
  #64  
NWAE Cobalt's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: 07-27-07
Posts: 17,332
Likes: 1
From: Puyallup, WA
Originally Posted by junedog1975
Hey!
Well, I was going to get the ANZO headlight upgrade, but i heard some of the LEDs in the Lights break or just dont work !! So, I,m going to go a different route! My headlights will be painted the same color as my car! All the chrome housing except a fine trim around the headlight and turn signal! I'm also going to do that to my tailights too!! But on the rears it's going to look more like the coupe! I think this project is going to be SICK!! You guys will see it at the meet! I might not have my rims on by the meet, considering I also have to lower the car too!! I'm plannig to put MSR 65 18" black with polished lip and dropping the car about 2" to close the wheel gap! Does this sound good so far!
if you need any help with lowering or anything I have all the tools and such and the spring compressors and can help ya out, just let me know
Reply
Old Jun 20, 2009 | 12:12 PM
  #65  
junedog1975's Avatar
New Member
 
Joined: 06-12-09
Posts: 42
Likes: 0
From: Shoreline,WA
Cool!! Hey, do you know of anybody going to Traffic Jam Car Show?? Hit me up!! You can contact me @ jerrylunde@ymail.com

Last edited by junedog1975; Jun 20, 2009 at 08:30 PM.
Reply
Old Jun 20, 2009 | 03:00 PM
  #66  
warrenb213's Avatar
Senior Member
 
Joined: 09-09-07
Posts: 1,377
Likes: 0
From: Vancouver, WA
please send numbers via pm, not through this forum
Reply
Old Jun 20, 2009 | 04:53 PM
  #67  
NWAE Cobalt's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: 07-27-07
Posts: 17,332
Likes: 1
From: Puyallup, WA
Originally Posted by warrenb213
please send numbers via pm, not through this forum
meh, ive put my phone number in a thread before, not much anyone can do with it haha
Reply
Old Jun 21, 2009 | 01:05 AM
  #68  
madmando08's Avatar
New Member
 
Joined: 06-14-09
Posts: 12
Likes: 0
From: Tacoma, WA
Originally Posted by scagnetti76
welcome jerry!
like suggested, come to the upcoming meet, there will be MORE than enough ideas!
When is the next meet and at what time?
Reply
Old Jun 21, 2009 | 01:29 PM
  #69  
warrenb213's Avatar
Senior Member
 
Joined: 09-09-07
Posts: 1,377
Likes: 0
From: Vancouver, WA
the 28th
Reply
Old Jun 21, 2009 | 04:23 PM
  #70  
tuanies's Avatar
New Member
 
Joined: 07-24-08
Posts: 165
Likes: 0
From: Graham, WA
Originally Posted by junedog1975
Cool!! Hey, do you know of anybody going to Traffic Jam Car Show?? Hit me up!! You can contact me @ jerrylunde@ymail.com
I'll be there at the Oregon and Washington shows promoting NWMotoring.

Originally Posted by mr84monte
I realized I never posted on this thread (wanted to make sure I had the car first)

Rob
09" Cobalt ss/tc white
Edgewood WA (basically Auburn or Federal Way)(Have Auburn address but Federal Way phone number)
Hey I'm right in Puyallup, if you see a red HHR SS with an autobot sticker on the driver side door and NWMotoring.com stickers on the rear quarter windows, that'd be me .

Last edited by tuanies; Jun 21, 2009 at 04:23 PM. Reason: Automerged Doublepost
Reply
Old Jun 21, 2009 | 05:24 PM
  #71  
YelloEye's Avatar
Senior Member
iTrader: (3)
 
Joined: 01-12-07
Posts: 4,184
Likes: 36
From: WA
Originally Posted by NWAE Cobalt
if you need any help with lowering or anything I have all the tools and such and the spring compressors and can help ya out, just let me know
Wait those things actually have a use?!? lol I did my shock fix without them. Oh and that fix.....yea didnt fix it lol, Need rubber or some other soft material to squeeze in there.
Reply
Old Jun 21, 2009 | 11:32 PM
  #72  
NWAE Cobalt's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: 07-27-07
Posts: 17,332
Likes: 1
From: Puyallup, WA
Originally Posted by YelloEye
Wait those things actually have a use?!? lol I did my shock fix without them. Oh and that fix.....yea didnt fix it lol, Need rubber or some other soft material to squeeze in there.
rear or front??? the rears you dont use it for, on the front you do if you have to...but can sometimes be done without them if you do it right
Reply
Old Jun 28, 2009 | 11:55 AM
  #73  
RonSS's Avatar
Member
 
Joined: 09-27-05
Posts: 231
Likes: 2
From: Portland. OR
Ron Selberg
Old guy (but not as old as SSyeller)
Drag Racer
Portland
06 SS/SC stage 2
Warranty is ended, now starting some simple mods, brakes, springs, exh and hopefully something to kill the wheel hop!

Ron
Reply
Old Jun 28, 2009 | 10:17 PM
  #74  
NWAE Cobalt's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: 07-27-07
Posts: 17,332
Likes: 1
From: Puyallup, WA
Originally Posted by RonSS
Ron Selberg
Old guy (but not as old as SSyeller)
Drag Racer
Portland
06 SS/SC stage 2
Warranty is ended, now starting some simple mods, brakes, springs, exh and hopefully something to kill the wheel hop!

Ron
good to see you!!! we will be down there next weekend for the races on sat

btw...i know there are alot of people that showed to the meet today that should post up here

Last edited by NWAE Cobalt; Jun 28, 2009 at 10:17 PM. Reason: Automerged Doublepost
Reply
Old Jun 28, 2009 | 11:20 PM
  #75  
Spectral's Avatar
Senior Member
 
Joined: 10-30-06
Posts: 11,850
Likes: 0
From: Federal Way, Washington
Originally Posted by RonSS
Ron Selberg
Old guy (but not as old as SSyeller)
Drag Racer
Portland
06 SS/SC stage 2
Warranty is ended, now starting some simple mods, brakes, springs, exh and hopefully something to kill the wheel hop!

Ron
ottp rotated mounts
Reply



All times are GMT -4. The time now is 02:42 AM.