Mark this thread as Unsold
For Sale (2) M62 's + ottp stage 2
Thread Starter
Banned
Joined: 06-23-05
Posts: 8,004
Likes: 0
From: ky
(2) M62 's everything SOLD SOLD SOLD
getting the ottp stage 3 soon as the tax check clears and need to get rid of my current stuff.
SOLD SOLD SOLD SOLD (1) m62 supercharger i just bought on here for $130 from someone, they said it works perfect, it looks like they shaved the snout down a bit with a dremel to put a smaller pulley on. it does not come with a hub or pulley and needs a new MAP sensor (map sensors $25 shipped on ebay) i haven't ran this personally, but when you turn the shaft, it turns freely and there does not appear to be any binding. there is some green staining on the rotors, i'm taking a wild guess and saying that was from windshield washer fluid being injected through a throttle body spacer, but unsure.
this one is $200+ shipping
!!!!!!!!!!!!!!!!!THE HUB AND THE MAP SENSOR IN THE PICTURE ARE NOT INCLUDED WITH THE $200 BLOWER SALE!!!!!!!!!!!!!!!!
a wee bit of rotor rub, probably from running a 2.6 or 2.7 pulley, i got the worst two spots in the pics.
SOLD SOLD SOLD SOLD(1) m62 supercharger this is the one on my car now and i can assure you that it works perfectly. it has been ported, the silencer holes have been welded (not plugged with some cheapo quick steel stuff). after the porting i had the body bead blasted so it looks fresh (the snout was not done though) it has new intense oil, needle bearing grease, intense coupler, intese hub with a 2.6", 2.8" and 3.3" (it may be a 3.4" i'll have to double check when i get home) ** the snout has not been shaved, so if you want to use the 2.6", you will have to do that first, i never ran anything smaller than a 2.8" on it**
this one is $350+ shipping --- well worth that plus some ---
here is a picture of the body showing it's porter&welded, the blower is on my car not and it's dark outside, i'll get pics of it mounted tomorrow
mounted in the car currently:
here's the 3.30" and 2.60" pullies, the 2.8" is currently mounted on the car
will sell everything together for $650+ shipping OR i will trade straight up for a set of ss/tc wheels with no damage on them.
CONFIRMED PAYPAL ACCOUNTS ONLY NO EXCEPTIONS
*** I would prefer to trade someone for a set of the TC rims, so that person will have priority ***
SOLD SOLD SOLD SOLD (1) m62 supercharger i just bought on here for $130 from someone, they said it works perfect, it looks like they shaved the snout down a bit with a dremel to put a smaller pulley on. it does not come with a hub or pulley and needs a new MAP sensor (map sensors $25 shipped on ebay) i haven't ran this personally, but when you turn the shaft, it turns freely and there does not appear to be any binding. there is some green staining on the rotors, i'm taking a wild guess and saying that was from windshield washer fluid being injected through a throttle body spacer, but unsure.
this one is $200+ shipping
!!!!!!!!!!!!!!!!!THE HUB AND THE MAP SENSOR IN THE PICTURE ARE NOT INCLUDED WITH THE $200 BLOWER SALE!!!!!!!!!!!!!!!!
a wee bit of rotor rub, probably from running a 2.6 or 2.7 pulley, i got the worst two spots in the pics.
SOLD SOLD SOLD SOLD(1) m62 supercharger this is the one on my car now and i can assure you that it works perfectly. it has been ported, the silencer holes have been welded (not plugged with some cheapo quick steel stuff). after the porting i had the body bead blasted so it looks fresh (the snout was not done though) it has new intense oil, needle bearing grease, intense coupler, intese hub with a 2.6", 2.8" and 3.3" (it may be a 3.4" i'll have to double check when i get home) ** the snout has not been shaved, so if you want to use the 2.6", you will have to do that first, i never ran anything smaller than a 2.8" on it**
this one is $350+ shipping --- well worth that plus some ---
here is a picture of the body showing it's porter&welded, the blower is on my car not and it's dark outside, i'll get pics of it mounted tomorrow
mounted in the car currently:
here's the 3.30" and 2.60" pullies, the 2.8" is currently mounted on the car
will sell everything together for $650+ shipping OR i will trade straight up for a set of ss/tc wheels with no damage on them.
CONFIRMED PAYPAL ACCOUNTS ONLY NO EXCEPTIONS
*** I would prefer to trade someone for a set of the TC rims, so that person will have priority ***
Last edited by selfinfliction; Feb 1, 2010 at 08:25 PM.
Free bump for a good setup!
1) m62 supercharger i just bought on here for $130 from someone, they said it works perfect, it looks like they shaved the snout down a bit with a dremel to put a smaller pulley on. it does not come with a hub or pulley and needs a new MAP sensor (map sensors $25 shipped on ebay) i haven't ran this personally, but when you turn the shaft, it turns freely and there does not appear to be any binding. there is some green staining on the rotors, i'm taking a wild guess and saying that was from windshield washer fluid being injected through a throttle body spacer, but unsure.
Good luck....
Senior Member
Joined: 02-04-08
Posts: 1,087
Likes: 0
From: dayton
Dibs
lol
Thread Starter
Banned
Joined: 06-23-05
Posts: 8,004
Likes: 0
From: ky
i buy parts on ebay all the time for motorcycles when they're about 1/2 of what they sell for on the forums
yeah as soon as i get my stuff in and can ship this stage 2 stuff, i'll start contacting the people on the list starting at the top and working my way down
Last edited by selfinfliction; Jan 21, 2010 at 07:21 AM. Reason: Automerged Doublepost
Thread Starter
Banned
Joined: 06-23-05
Posts: 8,004
Likes: 0
From: ky
just found out from the bank, my refund will post on the 26th, which means i can sell everything and ship next week any time after that.
once i get the stage3 kit ordered, i'll garage the car and remove everything
once i get the stage3 kit ordered, i'll garage the car and remove everything
Thread Starter
Banned
Joined: 06-23-05
Posts: 8,004
Likes: 0
From: ky
ok everyone ready to sell and ship.
dcampbell has dibs on the ported supercharger hub and and pullies
still have the second m62, 60# injectors and wiring harness for sell
also i did find an oem pulley that i can have mounted on the second blower if whoever buys it wants it.
dcampbell has dibs on the ported supercharger hub and and pullies
still have the second m62, 60# injectors and wiring harness for sell
also i did find an oem pulley that i can have mounted on the second blower if whoever buys it wants it.
Thread Starter
Banned
Joined: 06-23-05
Posts: 8,004
Likes: 0
From: ky
ported supercharger sold
cheap supercharger and the other stuff still up for grabs. have a few inquiries through pm but it's first come first serve and if someone buys it tonight, i can ship it tomorrow morning
both superchargers sold
cheap supercharger and the other stuff still up for grabs. have a few inquiries through pm but it's first come first serve and if someone buys it tonight, i can ship it tomorrow morning
both superchargers sold
Last edited by selfinfliction; Feb 1, 2010 at 08:18 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post