damnit dude if it wasnt so close to Christmas these would be mine.

 

$25 deposit will hold them until after Christmas

 

TPI Sold

 

they may fit, but he has an 08 2.4 with the F23. depends on spline count i guess

 

The ABS speed sensors also do not match.

 

Check the Chevy part numbers to see if their the same. The F23 splines are different I think smaller.

 

old thread i know. still have these? doesnt say if you sold them yet.

 

I still have them. One guy interested but dosnt have the cash right now

 

ive never changed wheel hubs before, what all is involved with that? and i may be interested, saves me from having to custom drill some wheels.

 

Its the same as changing brakes except you go one step further. 3 bolts and a plug in the front and 4 nuts and a plug in the back on each side. It took me a couple hours taking my time.

 

allright. i gotta find a place to get these shipped so ill let you know when im taking them.

 

Any luck on lsj hubs

 

This is a great concept but you still have to have the rotors drilled with 5x114 pattern as well.

 

i could just buy some as well.

 

For a cobalt.....where?

 

im sure i could figure something out.

ugh, im so tired, i spent hours looking to see if the wheels i want will clear brembos with the +30 offset. no clear cut answer out there. all i know is the nissan guys (350z, g35), genesis coupe, and evo X guys get them to clear brembos... but at +22 offset and lower. im not going lower than +30mm for offset.

wheel size im looking at: 18X9.5 +30mm
custom drilled to 5X110 unless i change bolt pattern.

pic of said rims:

 

Still waiting on my drill guide

 

Yeah I wish these worked for the lsj

 

The 30 offset and 9.5 width will give you 22 millimeters less (the inside of the wheel to the strut housing) and extend an extra 44 millimeters (position of the outside edge of the wheel).

 

So wait...once you change the hub, what do you do about the rotors? Did you get some custom drilled or buy some in a similar diameter for a 5x114 car? I like the idea of these and that would certainly open up a world of opportunity in the wheel department I just need more info lol

 

Damn, if only these were for an LSJ!!