For Sale Back again...with parts not sold from last year= BIG discounts.
12-30-2011, 03:28 PM
#1
New Member
Thread Starter
iTrader: (1)
Join Date: 11-02-06
Location: Beaver, PA
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Back again...with parts not sold from last year= BIG discounts.
Some of you might remember me from my FS thread around this time last year. Some of you might even have uttered more than a few curse words at me for my lack of response to PM's from around March. Well, I am very truly sorry for that. I was called away to the Middle East (not in the military) for about 8 months and had very little contact with the outside world.
Anyway, I know I said that I was in no rush to sell them and would let them sit forever if I felt like it, but I need the room in my garage so I’m slashing my asking prices in half or better. The goody, go fast, parts were quickly sold, but there are still some nice parts here.
Thanks for taking a look. If you have any questions or want to contact me outside of PM’s, my e-mail is: rich_993tt@hotmail.com
*Autometer dual guage A pillar pod (I have 2, don’t ask why): These usually sell for $50
I’ll sell them for $30.00 each+shipping
*SOLDKoni Sport Shocks/Struts (Yellow) Single adjustable for rebound: The struts are mounted in stock Cobalt strut housings so no need to cut up your own struts. They have about 10k miles on them. Price from Shox.com $500.00
I’ll sell them for $150.00+shipping
*SOLDLS4 Throttle body for LSJ (used): This is just the throttle body bought from ZZP. Price from ZZP $200.00
I’ll set it for $50.00+shipping
*SALE PENDINGRial Nogaro wheels 18”X8” and Cooper tires (mounted) set of 4: These are for SS/SC/TC fitment only. They are the bright satin finish with polished lip. The tires are Cooper all seasons in stock size. They have about 20k miles on them and are generally in good shape. The wheels are in good shape except for some pitting in the polished lip on some of them. Price for only the wheels from TireRack $812.00
Edit: I just looked at these for the first time in over a year and the srtange spider webbing has gotten worse, so I'm knocking some more money off.
I’ll sell the complete set for $200.00+shipping (figure at least $65.00 per wheel/tire!)
*Corbeau seats, CR1 black cloth(Pair): Had these in my car for about 2 years. In fairly good shape. The drivers side thigh bolster is a little smooshed, and the pass seat has some sun fading that can be fixed with a little black dye. Price from Corbeau $400.00 each.
Given the condition, I’ll sell the pair for $150.00+shipping (No idea what it would cost to ship these)
*Corbeau seats, VX2000 black leather (pair): These were in my car for about a year. The leather and seat foam is in great shape, the hard plastic seat backs have some scratches that could probably be polished out. Price from Corbeau $700.00 each. I’ll sell the pair for $300.00+shipping (no idea what it would cost to ship these)
*Corbeau Cobalt specific seat brackets. Price from Corbeau $100.00 each
These don’t actually fit the greatest so with that in mind, I’ll sell the pair for $60.00+shipping
*SALE PENDINGStock Cobalt SS/SC Wheels/Tires: About 15k miles on them. Tires are in great shape (Pirelli P Zero’s). The wheels are in pretty good shape. One or two have a small amount of the coating flaking off right at the edge of the rim.$150.00+shipping (figure about $65.00 per wheel/tire!)
*Stock SS/SC Transmission mounts: They appear to be in good shape.
$10.00+shipping
*Stock SS/SC injectors: These are practically brand new. I have no idea of the flow.
$10.00+shipping
*Stock SS/SC exhaust manifold. Good shape.
$20.00+shipping
*Stock SS/SC springs: These only have about 8K miles on them. In good shape.
$20.00+shipping
Anyway, I know I said that I was in no rush to sell them and would let them sit forever if I felt like it, but I need the room in my garage so I’m slashing my asking prices in half or better. The goody, go fast, parts were quickly sold, but there are still some nice parts here.
Thanks for taking a look. If you have any questions or want to contact me outside of PM’s, my e-mail is: rich_993tt@hotmail.com
*Autometer dual guage A pillar pod (I have 2, don’t ask why): These usually sell for $50
I’ll sell them for $30.00 each+shipping
*SOLDKoni Sport Shocks/Struts (Yellow) Single adjustable for rebound: The struts are mounted in stock Cobalt strut housings so no need to cut up your own struts. They have about 10k miles on them. Price from Shox.com $500.00
I’ll sell them for $150.00+shipping
*SOLDLS4 Throttle body for LSJ (used): This is just the throttle body bought from ZZP. Price from ZZP $200.00
I’ll set it for $50.00+shipping
*SALE PENDINGRial Nogaro wheels 18”X8” and Cooper tires (mounted) set of 4: These are for SS/SC/TC fitment only. They are the bright satin finish with polished lip. The tires are Cooper all seasons in stock size. They have about 20k miles on them and are generally in good shape. The wheels are in good shape except for some pitting in the polished lip on some of them. Price for only the wheels from TireRack $812.00
Edit: I just looked at these for the first time in over a year and the srtange spider webbing has gotten worse, so I'm knocking some more money off.
I’ll sell the complete set for $200.00+shipping (figure at least $65.00 per wheel/tire!)
*Corbeau seats, CR1 black cloth(Pair): Had these in my car for about 2 years. In fairly good shape. The drivers side thigh bolster is a little smooshed, and the pass seat has some sun fading that can be fixed with a little black dye. Price from Corbeau $400.00 each.
Given the condition, I’ll sell the pair for $150.00+shipping (No idea what it would cost to ship these)
*Corbeau seats, VX2000 black leather (pair): These were in my car for about a year. The leather and seat foam is in great shape, the hard plastic seat backs have some scratches that could probably be polished out. Price from Corbeau $700.00 each. I’ll sell the pair for $300.00+shipping (no idea what it would cost to ship these)
*Corbeau Cobalt specific seat brackets. Price from Corbeau $100.00 each
These don’t actually fit the greatest so with that in mind, I’ll sell the pair for $60.00+shipping
*SALE PENDINGStock Cobalt SS/SC Wheels/Tires: About 15k miles on them. Tires are in great shape (Pirelli P Zero’s). The wheels are in pretty good shape. One or two have a small amount of the coating flaking off right at the edge of the rim.$150.00+shipping (figure about $65.00 per wheel/tire!)
*Stock SS/SC Transmission mounts: They appear to be in good shape.
$10.00+shipping
*Stock SS/SC injectors: These are practically brand new. I have no idea of the flow.
$10.00+shipping
*Stock SS/SC exhaust manifold. Good shape.
$20.00+shipping
*Stock SS/SC springs: These only have about 8K miles on them. In good shape.
$20.00+shipping
Last edited by Boober; 12-31-2011 at 01:28 PM.
12-30-2011, 04:01 PM
#6
New Member
Thread Starter
iTrader: (1)
Join Date: 11-02-06
Location: Beaver, PA
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
These are some older pictures but I will take new ones with my username if that's the "new" thing. I just went into my garage and looked at the Rial's and even though they have been sitting in my garage and out of the weather for over a year, that strange spider webbing stuff has gotten worse! The polished lips will need to have the clearcoating removed and then they metal will need to be sanded and buffed (or you could just paint them I guess). I'm dropping the price to $200.00
12-30-2011, 04:04 PM
#7
Senior Member
Join Date: 06-03-07
Location: Winnipeg, Manitoba, Canada
Posts: 24,280
Likes: 0
Received 1 Like
on
1 Post
These are some older pictures but I will take new ones with my username if that's the "new" thing. I just went into my garage and looked at the Rial's and even though they have been sitting in my garage and out of the weather for over a year, that strange spider webbing stuff has gotten worse! The polished lips will need to have the clearcoating removed and then they metal will need to be sanded and buffed (or you could just paint them I guess). I'm dropping the price to $200.00
12-30-2011, 04:18 PM
#8
New Member
Thread Starter
iTrader: (1)
Join Date: 11-02-06
Location: Beaver, PA
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
It looks like they just have clearcoat on the lips, might actually have silver paint and clear coat. I just scraped on one of the webs and it is definitely the clearcoating that has bubbled up, because it is easy to remove, but it will need to be done to each wheel lip. The centers are in great shape by the way. I will get new pictures up asap, please be patient 
.
edit: if I had time, or if it were me buying them, I think I might just sand the lips and paint them silver.
.edit: if I had time, or if it were me buying them, I think I might just sand the lips and paint them silver.
12-30-2011, 04:19 PM
#9
Senior Member
Join Date: 06-03-07
Location: Winnipeg, Manitoba, Canada
Posts: 24,280
Likes: 0
Received 1 Like
on
1 Post
It looks like they just have clearcoat on the lips, might actually have silver paint and clear coat. I just scraped on one of the webs and it is definitely the clearcoating that has bubbled up, because it is easy to remove, but it will need to be done to each wheel lip. The centers are in great shape by the way. I will get new pictures up asap, please be patient .
.I should have explained myself. lol. Im patient no worries.
12-30-2011, 04:37 PM
#11
New Member
Thread Starter
iTrader: (1)
Join Date: 11-02-06
Location: Beaver, PA
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Not to get off topic, but I tracked my Cobalt for 3 years with the GM PP slotted front rotors, street/track pads, good fluid, and braided lines and NEVER had any issues on track. Is it mostly for appearance?
12-30-2011, 04:44 PM
#13
Senior Member
Join Date: 06-03-07
Location: Winnipeg, Manitoba, Canada
Posts: 24,280
Likes: 0
Received 1 Like
on
1 Post
Oh, sorry. I haven't got a clue if they clear Brembo's. What kit? do the stock SS/SC wheels clear? Who even makes a kit with Brembo's? Maybe they could answer that question.
Not to get off topic, but I tracked my Cobalt for 3 years with the GM PP slotted front rotors, street/track pads, good fluid, and braided lines and NEVER had any issues on track. Is it mostly for appearance?
Not to get off topic, but I tracked my Cobalt for 3 years with the GM PP slotted front rotors, street/track pads, good fluid, and braided lines and NEVER had any issues on track. Is it mostly for appearance?
12-30-2011, 07:12 PM
#21
New Member
Thread Starter
iTrader: (1)
Join Date: 11-02-06
Location: Beaver, PA
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Totally forgot about SS/TC. It's been a while since I was in the community! I got several PM's and e-mails and i will answer each one as soon as I'm home tonight. As a general statement of my practices, I sell on first come, first served basis.
12-31-2011, 07:37 AM
#25
Junior Member
iTrader: (1)
Join Date: 06-02-10
Location: bethlehem
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
daaaaam.. im in PA... i bought a set of those rims... just rims for $400 shipped. they are mint tho. but hell of a good deal on those. i get lots of compliments on how they look. FYI gonna cost 80-100 for shipping. best bet is to ship one rim in each box unless you can sell local. guy who sold me mine spent $20 per rim on 2 rims. then tried saving $$$ by boxing up 2 together and ended up costing him $60 to ship 2 in one single box 
costed him an extra 20bucks
costed him an extra 20bucks