Mark this thread as Unsold
COMPLETE LNF Swap from a 2008 Cobalt SS
#1
New Member
Thread Starter
Join Date: 02-24-14
Location: South Jersey
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
COMPLETE LNF Swap from a 2008 Cobalt SS
Pics in post #7
I was going to use it for a project, I lost interest and I'm looking to go a different route.
It's out of a 2008 Cobalt SS and has 58k miles. This is the 260hp/260tq (factory rated at flywheel) Turbocharged 2.0 Ecotech engine.
I WILL NOT BE PARTING THIS OUT
Here is what's included-
Complete stock motor and accessories with 5speed transmission bolted up. Stock clutch/flywheel
Uncut engine/electrical harness
PCM, BCM, underhood fuse box
stock axles, stock shifter and cables.
These motors make great power on the stock turbo with bolt ons, upping the boost and a good tune. Most people see 300+ wheel hp and the same if not more tq. If you like E85 or meth, It will make even more power
$3200 and I'm firm on that. I'm taking a decent hit on the price already. You will not be able to find a cheaper deal on a more complete swap.
Buyer responsible for pickup. I don't have a truck, so I won't be able to deliver it. And freight is expensive. PM me with your number or email me and we'll talk. Cash is preferred (so you don't have to spend $100 in paypal fees.) Check my trader feedback over on LS1tech (98tadriver) and you will see that it is impeccable.
Thanks for looking!
I was going to use it for a project, I lost interest and I'm looking to go a different route.
It's out of a 2008 Cobalt SS and has 58k miles. This is the 260hp/260tq (factory rated at flywheel) Turbocharged 2.0 Ecotech engine.
I WILL NOT BE PARTING THIS OUT
Here is what's included-
Complete stock motor and accessories with 5speed transmission bolted up. Stock clutch/flywheel
Uncut engine/electrical harness
PCM, BCM, underhood fuse box
stock axles, stock shifter and cables.
These motors make great power on the stock turbo with bolt ons, upping the boost and a good tune. Most people see 300+ wheel hp and the same if not more tq. If you like E85 or meth, It will make even more power
$3200 and I'm firm on that. I'm taking a decent hit on the price already. You will not be able to find a cheaper deal on a more complete swap.
Buyer responsible for pickup. I don't have a truck, so I won't be able to deliver it. And freight is expensive. PM me with your number or email me and we'll talk. Cash is preferred (so you don't have to spend $100 in paypal fees.) Check my trader feedback over on LS1tech (98tadriver) and you will see that it is impeccable.
Thanks for looking!
Last edited by 98tadriver; 07-16-2014 at 11:03 PM.
#3
New Member
Thread Starter
Join Date: 02-24-14
Location: South Jersey
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Ah crap, I'm sorry about that I'm so used to the other forum rules that I'm thinking to myself, "I posted a price, what else do I need to do? lol" Just read the rules about the pics. I'll get pics as soon as I can head over to the shop. Is there a way to tell if it's a LSD or non LSD trans? I think I read somewhere that a few of TC'd SS's received the LSD pre 2010, and then all 2010-on TC'd SS's received them.
#8
New Member
Thread Starter
Join Date: 02-24-14
Location: South Jersey
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
I might sell the MR2 as it is currently a roller or throw the LNF stuff in there and sell it all as an unfinished build, but I'm not 100% sure yet. I've just been really busy lately and haven't had the time to work on it. During that time period, I began to lose interest.
#14
New Member
Thread Starter
Join Date: 02-24-14
Location: South Jersey
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
#19
New Member
Thread Starter
Join Date: 02-24-14
Location: South Jersey
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
jcalvin1126
2.0L LNF Performance Tech
3
09-11-2015 10:24 AM
09BlkCrusader
Parts
30
09-09-2015 04:47 PM