For Sale FEELER! SC kit, possible part out.
Thread Starter
Junior Member
iTrader: (6)
Joined: 01-27-11
Posts: 395
Likes: 0
From: Fort Wayne, IN. USA
FEELER! SC kit, possible part out.
Alright as the title states this is a FEELER. I would like to see if I could get these parts lined up to sell first before actually moving on. I do not have pics as all of the parts are still on the car but if a few pics are needed I can take them tomorrow, moderators please let me know.
Reason for selling: I want to turbo swap. Supercharged was fun but its time to move on.
Engine: LSJ
Parts: Factory Eaton supercharger with 2.7 zzp pulley on it, I also have a 2.9 pulley that I will include and a brand new uninstalled zzp coupler with SC oil. I can either put the coupler in and change the oil or the buyer can do so. 60# pound injectors w/harness. Dual pass end plate with extra coolant reservoir, but not the bracket, and all of the plumbing which is NOT the option B kit, it is pieced together with brass fittings and heater hose, the air vents through the vent nossle of the reservoir and my IAT2's are a consistent 25-30 degrees over ambient while cruising. LSJ intake manifold. LSJ throttle body. ZZP 3" intake with K&N filter. ZZP stage 3 heat exchanger. Tensioner with oversized 3" pulley on it. Stock LSJ GM belt. Working IC pump. LSJ alternator. BAD-MAB headers. ZZP 3" exit catless Downpipe. Oil dipstick tube. Factory boost gauge. Also intake manifold gasket and supercharger gasket.
Price $2400+shipping
Note: This will not directly bolt up to a 2.4 or 2.2 because the belt is a 6 rib belt, not 5.
Buyer would be responsible for tune.
I would like to keep this as a kit but as the title states if I can get every piece accounted for then a part out could be an option. Before anyone starts hounding me on the price please look at what you are receiving, I understand it is used but there is a lot there.
Reason for selling: I want to turbo swap. Supercharged was fun but its time to move on.
Engine: LSJ
Parts: Factory Eaton supercharger with 2.7 zzp pulley on it, I also have a 2.9 pulley that I will include and a brand new uninstalled zzp coupler with SC oil. I can either put the coupler in and change the oil or the buyer can do so. 60# pound injectors w/harness. Dual pass end plate with extra coolant reservoir, but not the bracket, and all of the plumbing which is NOT the option B kit, it is pieced together with brass fittings and heater hose, the air vents through the vent nossle of the reservoir and my IAT2's are a consistent 25-30 degrees over ambient while cruising. LSJ intake manifold. LSJ throttle body. ZZP 3" intake with K&N filter. ZZP stage 3 heat exchanger. Tensioner with oversized 3" pulley on it. Stock LSJ GM belt. Working IC pump. LSJ alternator. BAD-MAB headers. ZZP 3" exit catless Downpipe. Oil dipstick tube. Factory boost gauge. Also intake manifold gasket and supercharger gasket.
Price $2400+shipping
Note: This will not directly bolt up to a 2.4 or 2.2 because the belt is a 6 rib belt, not 5.
Buyer would be responsible for tune.
I would like to keep this as a kit but as the title states if I can get every piece accounted for then a part out could be an option. Before anyone starts hounding me on the price please look at what you are receiving, I understand it is used but there is a lot there.
Thread Starter
Junior Member
iTrader: (6)
Joined: 01-27-11
Posts: 395
Likes: 0
From: Fort Wayne, IN. USA
OK.... This is a feeler, price does not say firm. I am up for offers but I am not going to sell all of this for a grand. The reason you start high is so you can negotiate, ever watch America Pickers?
Thread Starter
Junior Member
iTrader: (6)
Joined: 01-27-11
Posts: 395
Likes: 0
From: Fort Wayne, IN. USA
I'm only calling it a feeler because I don't have pics tonight and I want to know if there are any serious buyers before I rip all this off of the car, gotta understand I drive this car, at least until cold snaps roll in. If I were to get a serious buyer I would sell. I understand feelers are a no go because people usually back out and I know no pics are a no go but like I said I can take some tomorrow while the sun is out.
Malicious-If I can get a buyer on the other items then I will throw you a price.
I'd also be down for a trade if anyone who has a turbo LSJ wants to go back to stock or back to SC anyway, obviously I'd pay along with the trade.
Malicious-If I can get a buyer on the other items then I will throw you a price.
I'd also be down for a trade if anyone who has a turbo LSJ wants to go back to stock or back to SC anyway, obviously I'd pay along with the trade.
You need a picture for every part you are selling. Feeler threads are not allowed. If you wish to hold shipping until every part is sold you need to say so. Other wise you're selling a kit, or you're selling parts.
If you want to, start a list with everything you're selling and write down the buyers name after each part they've claimed. Once you have a name for every part start collecting money and shipping. But the classified rules still apply. Which judging by your posts you're already well aware of them. So why make the thread..... "Hey I know this is against the rules but I'm going to do it anyways."
If you want to, start a list with everything you're selling and write down the buyers name after each part they've claimed. Once you have a name for every part start collecting money and shipping. But the classified rules still apply. Which judging by your posts you're already well aware of them. So why make the thread..... "Hey I know this is against the rules but I'm going to do it anyways."
Thread
Thread Starter
Forum
Replies
Last Post












