Mark this thread as Unsold
For Sale Great high quality parts for sale!
#1
Senior Member
Thread Starter
Great high quality parts for sale! LOWER PRICES
Prices are for shipping to the US only.
!!MAKE AN OFFER !!via PM. I accept Paypal or money order. Local pickups will get a discount so PM me so we can negotiate.
All parts are used except for the QTP Cutout which is BRAND NEW.
SOLD to Marca34TWM Short Throw Shifter. Best shifter available for the Cobalt. Fits LSJ and LNF Cobalts. Includes shifter base bushings, new zip ties and a little bag of white lithium grease.
Brand new with base bushings is 220 without shipping. $185 shipped
SOLD! to elecblue06Turbo Tech Racing Solid Upper Engine Mount. Could use a paint job but works great! Installs in less than 30 minutes. Shifts are 100% better with minimized wheel hop. Interior vibrations are not really that bad on the highway. Similar to having a very quiet catback. Around town the vibes are still tolerable but a little louder.
Brand new from TTR is 190 without shipping. $120 shipped
SOLD TO HHR-2009Progress Rear Sway Bar. Some rust and needs a paint job as well. Installs in 10 minutes with help of a friend to hold it up while you put the bolts in. If you are a smaller person you dont even need to jack the car up.
Brand new these go for $160. $125 shipped
Intense Poly Trans Bushings already pressed into the stock mounts. Bolt on and go! Vibes with the TTR engine mount are increased alot but is still tolerable. Can be compared to having a well broken in GMPP Touring catback on the highway. The reason I am asking more than just the bushings themselves is because you retain the ability to go back to stock if you ever sell the car.
Brand new bushings are $40 from intense-racing.com. $75 shipped
BRAND NEW QTP Exhaust Cutout. 2.5" with Stainless Y pipe. Wide open exhaust at the flip of a switch! This is the highest quality cutout on the market with a high torque motor and weather proof electrical connections.
190 Shipped OBO
THANKS!!!
Please note that I work out of town mon-thurs and I have limited internet access out there.
Bump
Bump offers considered!
!!MAKE AN OFFER !!via PM. I accept Paypal or money order. Local pickups will get a discount so PM me so we can negotiate.
All parts are used except for the QTP Cutout which is BRAND NEW.
SOLD to Marca34TWM Short Throw Shifter. Best shifter available for the Cobalt. Fits LSJ and LNF Cobalts. Includes shifter base bushings, new zip ties and a little bag of white lithium grease.
Brand new with base bushings is 220 without shipping. $185 shipped
SOLD! to elecblue06Turbo Tech Racing Solid Upper Engine Mount. Could use a paint job but works great! Installs in less than 30 minutes. Shifts are 100% better with minimized wheel hop. Interior vibrations are not really that bad on the highway. Similar to having a very quiet catback. Around town the vibes are still tolerable but a little louder.
Brand new from TTR is 190 without shipping. $120 shipped
SOLD TO HHR-2009Progress Rear Sway Bar. Some rust and needs a paint job as well. Installs in 10 minutes with help of a friend to hold it up while you put the bolts in. If you are a smaller person you dont even need to jack the car up.
Brand new these go for $160. $125 shipped
Intense Poly Trans Bushings already pressed into the stock mounts. Bolt on and go! Vibes with the TTR engine mount are increased alot but is still tolerable. Can be compared to having a well broken in GMPP Touring catback on the highway. The reason I am asking more than just the bushings themselves is because you retain the ability to go back to stock if you ever sell the car.
Brand new bushings are $40 from intense-racing.com. $75 shipped
BRAND NEW QTP Exhaust Cutout. 2.5" with Stainless Y pipe. Wide open exhaust at the flip of a switch! This is the highest quality cutout on the market with a high torque motor and weather proof electrical connections.
190 Shipped OBO
THANKS!!!
Please note that I work out of town mon-thurs and I have limited internet access out there.
Bump
Bump offers considered!
Last edited by JohnnySasakiMGS; 11-13-2009 at 08:09 PM. Reason: Automerged Doublepost
#4
Senior Member
still have the electric cutout send me a pm please
would be willing to pick this up from you for 120.00 shipped?? I am assuming it's new and never been wired up or installed. new from qtp these go for 160.00 (http://quicktimeperformance.com/QTEC/index.php)
would be willing to pick this up from you for 120.00 shipped?? I am assuming it's new and never been wired up or installed. new from qtp these go for 160.00 (http://quicktimeperformance.com/QTEC/index.php)
#10
well thats a fair offer guy parts arnt selling. nor mine i just dont see why everyone gets hurt ive picked up a tone of things cheap by offering what may seem a little low however if you need cash and u dont want to sit on them for 3 months for 30 more bucks is a fair deal to mee
#11
Senior Member
iTrader: (1)
well thats a fair offer guy parts arnt selling. nor mine i just dont see why everyone gets hurt ive picked up a tone of things cheap by offering what may seem a little low however if you need cash and u dont want to sit on them for 3 months for 30 more bucks is a fair deal to mee
#12
Senior Member
Thread Starter
still have the electric cutout send me a pm please
would be willing to pick this up from you for 120.00 shipped?? I am assuming it's new and never been wired up or installed. new from qtp these go for 160.00 (http://quicktimeperformance.com/QTEC/index.php)
would be willing to pick this up from you for 120.00 shipped?? I am assuming it's new and never been wired up or installed. new from qtp these go for 160.00 (http://quicktimeperformance.com/QTEC/index.php)
https://shop.quicktimeperformance.co...ct_detail&p=11
well thats a fair offer guy parts arnt selling. nor mine i just dont see why everyone gets hurt ive picked up a tone of things cheap by offering what may seem a little low however if you need cash and u dont want to sit on them for 3 months for 30 more bucks is a fair deal to mee
Last edited by JohnnySasakiMGS; 11-03-2009 at 06:55 PM. Reason: Automerged Doublepost
#13
Senior Member
yeah that's all I would want I weld professionally for work I would make my own turn down to locate it in the 3 "dp...
but I decieded not to purchase cause it's just asking for trouble. I have heard these leak when they are in the closed position.
but I decieded not to purchase cause it's just asking for trouble. I have heard these leak when they are in the closed position.
#14
Senior Member
Thread Starter
I cant see how they would leak though. Its a metal on metal contact when its closed. Maybe that was from a different brand?
#16
Senior Member
no it was qtp cause I was looking at another brand as a result of this find... it was race ready cutouts I believe. but either way you have great deals on a lot of great products you doing a part out? I might be interested in other things that you have.
#17
Senior Member
Thread Starter
Me too!
This is everything I have left off my car sadly. Except for the Stage 2. That would have to be a local blower-pcm-injector swap. Judging from your sig I dont think I have any parts that would benefit you =(
I do have 2 sets of stock lsj injectors though. I forgot about those.
I do have 2 sets of stock lsj injectors though. I forgot about those.
Thread
Thread Starter
Forum
Replies
Last Post
camaromanss1992
Parts
3
10-01-2015 10:51 PM