Mark this thread as Unsold
For Sale LNF Turbo Performance Parts
LNF Turbo Performance Parts
- Selling performance parts that have been stored in my basement. I’d estimate these were used around 25-40k miles as I swapped around parts. I own 4 cars and didn’t drive the Cobalt often so that’s why these mileage figures vary.
- All parts are clean and ready for install.
- Shipping is not included in pricing below.
- I’ll bring down prices as time goes on. It was hard to price as most of these aren’t sold anymore or have been out of stock since the pandemic began almost 2 years ago.
- Shipping from 48317 in Michigan via USPS or UPS if you want to estimate shipping. Usually UPS Ground is cheaper for really heavy stuff.
- You can PM me here, I take PayPal.
-------------------------
ZZP Intercooler - $100
- Missing L mounting brackets. Spacers and screws included. You can purchase simple 90 degree L brackets up at Home Deport or use the OEM ones from the stock intercooler.
- Something like this, but not 6 of them.
- This is the larger of the 2 intercoolers that ZZP offers.
https://i.imgur.com/mLJSkFw.jpg[/img]
https://i.imgur.com/vejaysh.jpg[/img]
https://i.imgur.com/NgOidVC.jpg[/img]
--------------------
Hahn 3” full T304 polished stainless exhaust - $300
- All new hardware and gaskets included.
- https://www.hahnracecraft.com/produc...s-turbocharged
- The muffler is massive. Quieter than ZZP’s offering. This is more about tone and flow over making noise.
- They copied Magnaflow’s design so it sounds like those mufflers if you’re familiar with them.
https://i.imgur.com/rIgNcwo.jpg[/img]
https://i.imgur.com/gEnmGnE.jpg[/img]
------------------------
Hahn Cold Air Intake - $120
- No longer sold by Hahn.
- K&N filter has been cleaned and will be good for 50-100k miles.
- Paper instructions included, but the install is very straight forward.
- Optional; I remember the rubber screw mount got loose so that “bubble” silicone coupler is included. Slide it over the pipe and zip tie it in position. The bubble portion won’t go through the fender hole and it quiets all vibration sounds by isolating the pipe.
https://i.imgur.com/iEObeHw.jpg[/img]
https://i.imgur.com/nxbizq3.jpg[/img]
- All parts are clean and ready for install.
- Shipping is not included in pricing below.
- I’ll bring down prices as time goes on. It was hard to price as most of these aren’t sold anymore or have been out of stock since the pandemic began almost 2 years ago.
- Shipping from 48317 in Michigan via USPS or UPS if you want to estimate shipping. Usually UPS Ground is cheaper for really heavy stuff.
- You can PM me here, I take PayPal.
-------------------------
ZZP Intercooler - $100
- Missing L mounting brackets. Spacers and screws included. You can purchase simple 90 degree L brackets up at Home Deport or use the OEM ones from the stock intercooler.
- Something like this, but not 6 of them.
- This is the larger of the 2 intercoolers that ZZP offers.
https://i.imgur.com/mLJSkFw.jpg[/img]
https://i.imgur.com/vejaysh.jpg[/img]
https://i.imgur.com/NgOidVC.jpg[/img]
--------------------
Hahn 3” full T304 polished stainless exhaust - $300
- All new hardware and gaskets included.
- https://www.hahnracecraft.com/produc...s-turbocharged
- The muffler is massive. Quieter than ZZP’s offering. This is more about tone and flow over making noise.
- They copied Magnaflow’s design so it sounds like those mufflers if you’re familiar with them.
https://i.imgur.com/rIgNcwo.jpg[/img]
https://i.imgur.com/gEnmGnE.jpg[/img]
------------------------
Hahn Cold Air Intake - $120
- No longer sold by Hahn.
- K&N filter has been cleaned and will be good for 50-100k miles.
- Paper instructions included, but the install is very straight forward.
- Optional; I remember the rubber screw mount got loose so that “bubble” silicone coupler is included. Slide it over the pipe and zip tie it in position. The bubble portion won’t go through the fender hole and it quiets all vibration sounds by isolating the pipe.
https://i.imgur.com/iEObeHw.jpg[/img]
https://i.imgur.com/nxbizq3.jpg[/img]
Last edited by Macgyver2484; Mar 11, 2022 at 12:48 PM. Reason: Additional items sold
I’ve adjusted prices. Here’s a roundup of Q&A over the past few weeks:
Yes, I’ll ship to Canada. It’s going to be expensive so please plan on $125+ for shipping via the cheapest carrier here (USPS) for a 2 week delivery time. These parts are big and heavy. Unfortunately, I’m not shipping to any other country outside the USA.
The exhaust will ship in its original foam insert box. They lay in security and won’t get damaged. Here’s a picture of the inside: https://imgur.com/sY3wNWJ
-----------------------
Here are 2 videos of the intake and exhaust turbines on the ZFR. They freely spin, they’re quiet, and there is no shaft play. Everything is included just as if you were to buy it new from ZZP - https://zzperformance.com/collection...ucts/zfr-turbo
https://imgur.com/4SSwz46
https://imgur.com/QItxxZw
Yes, I’ll ship to Canada. It’s going to be expensive so please plan on $125+ for shipping via the cheapest carrier here (USPS) for a 2 week delivery time. These parts are big and heavy. Unfortunately, I’m not shipping to any other country outside the USA.
The exhaust will ship in its original foam insert box. They lay in security and won’t get damaged. Here’s a picture of the inside: https://imgur.com/sY3wNWJ
-----------------------
Here are 2 videos of the intake and exhaust turbines on the ZFR. They freely spin, they’re quiet, and there is no shaft play. Everything is included just as if you were to buy it new from ZZP - https://zzperformance.com/collection...ucts/zfr-turbo
https://imgur.com/4SSwz46
https://imgur.com/QItxxZw
Removed the items that have sold so far. Thank you everyone for your interest.
Any questions I've got since last time we're just the user not reading the post as they were already answered.
Any questions I've got since last time we're just the user not reading the post as they were already answered.
Lowered prices again. I'll hang onto this stuff for a little while longer until I just toss them. While I understand many of you of struggling income wise - getting the right sized box to fit the parts, packing it all, and leaving work early to go to the post office for $20 just isn't practical in regards to lowering prices further.
Thread
Thread Starter
Forum
Replies
Last Post




