Mark this thread as Unsold
Lots of Fresh Turbo Things
Lots of Fresh Turbo Things
So long story short recently i bought and converted my LSJ to turbo. Well I have had some issues arise and its no longer feasible for me to continue this project.
Turbonetics 11017 t3/t4E 60 Trim Stage 3: .63 A/R hotside Journal Bearing.
Im 99% sure turbo seals are blown, not sure how extensive till i take the turbo off. EDIT:: Good news the Turbo was checked out and was determined fine. The reason i was blowing oil was because i was sent the wrong oil pan and the pan was overfilled with oil to the point where the oil level was above the drain. Turbo is completely fine.
With that cleared up I would like to get like 400.
Custom made Downpipe I had a custom downpipe made by Custom Tubes Inc. Has the 5 Bolt flange welded to it and was made to bolt directly to the turbo and down to the 2.5 inch catback. The downpipe itself is 2.5 inch catless. Would like to sell it will the turbo as a set, but whatever if not.
Made: 350ish
Want: 175
ZZP 50 MM BOV: 19 inch spring, no flange. Brand new, never put on.
Bought: 69.99
Want : 50
Tial 38mm MVS wastegate, with all flanges Less than 100 miles. Wont lie has 1 stripped screw on the head but the other 5 are fine.
Bought: 239.99
Want: 175
ZZP oil feed fitting used to get oil feed from LSJ block galley plug
Bought: 16.99
Want: 8
60# injectors with harness Still in plastic, never used.
Bought: 183.99
Want: 140
2.4L Alternator: Off an HHR with 40k on it
Bought: 50
Want: 25
2.2L Idler pulley assembly Got brand new from autozone
Bought: 60
Want: 30
2.2L belt
Bought: 20
Want: 10
ZZP LSJ Oil Pan Has return bung welded in. Less than 100 miles.I had a core refund on it, i wont ask for that back if it sells. My loss= your gain. EDIT:: Oil pan was not for the LSJ. I was sent the wrong pan. This is for the 2.2l/2.4l engine.
Bought: 149.99
Want: 100
TTR Intake Mani Less than 100 miles on it.
Bought: 499.99
Want: 400
Hallman Pro manual Boost controller Hasnt left the box it came in
Bought: 100ish? Cant remember
Want: 60
The rest of the stuff i have is just random stuff you dont need, but i would love to sell to you.
4 NGK V-Power BKR7E sparkplugs Beleive these are Step 1 colder plugs
Bought: 15
Want: 7
Custom oil fittings for turbo and pan These are just like custom made oil feed and return lines and fittings i bought and had made. They worked perfectly. If anyone wanted them for whatever reason i would like to get something for them.
Made: 40ish
Want: 15
CXRacing intercooler Bought this universal intercooler from CXRacing. Its 28x8x3.5 dimensions.
Bought: 149.00
Want: 100
I beleive that is everything. I am not trying to be sneaky or deceptive in anyway. I just want to try and get some of the money i spent back. All the new stuff either has 0 miles or under 100 miles on them. I dont have pictures yet, all the turbo stuff is on the car. I have spent above 2500$ on just the turbo essentials, Im not looking for that back. I just want something out of this. If you have any questions please message me. Prices are negotiable to an extent, but i think its all fair pricing. Thanks for looking!
Turbonetics 11017 t3/t4E 60 Trim Stage 3: .63 A/R hotside Journal Bearing.
Im 99% sure turbo seals are blown, not sure how extensive till i take the turbo off. EDIT:: Good news the Turbo was checked out and was determined fine. The reason i was blowing oil was because i was sent the wrong oil pan and the pan was overfilled with oil to the point where the oil level was above the drain. Turbo is completely fine.
With that cleared up I would like to get like 400.
Custom made Downpipe I had a custom downpipe made by Custom Tubes Inc. Has the 5 Bolt flange welded to it and was made to bolt directly to the turbo and down to the 2.5 inch catback. The downpipe itself is 2.5 inch catless. Would like to sell it will the turbo as a set, but whatever if not.
Made: 350ish
Want: 175
ZZP 50 MM BOV: 19 inch spring, no flange. Brand new, never put on.
Bought: 69.99
Want : 50
Tial 38mm MVS wastegate, with all flanges Less than 100 miles. Wont lie has 1 stripped screw on the head but the other 5 are fine.
Bought: 239.99
Want: 175
ZZP oil feed fitting used to get oil feed from LSJ block galley plug
Bought: 16.99
Want: 8
60# injectors with harness Still in plastic, never used.
Bought: 183.99
Want: 140
2.4L Alternator: Off an HHR with 40k on it
Bought: 50
Want: 25
2.2L Idler pulley assembly Got brand new from autozone
Bought: 60
Want: 30
2.2L belt
Bought: 20
Want: 10
ZZP LSJ Oil Pan Has return bung welded in. Less than 100 miles.I had a core refund on it, i wont ask for that back if it sells. My loss= your gain. EDIT:: Oil pan was not for the LSJ. I was sent the wrong pan. This is for the 2.2l/2.4l engine.
Bought: 149.99
Want: 100
TTR Intake Mani Less than 100 miles on it.
Bought: 499.99
Want: 400
Hallman Pro manual Boost controller Hasnt left the box it came in
Bought: 100ish? Cant remember
Want: 60
The rest of the stuff i have is just random stuff you dont need, but i would love to sell to you.
4 NGK V-Power BKR7E sparkplugs Beleive these are Step 1 colder plugs
Bought: 15
Want: 7
Custom oil fittings for turbo and pan These are just like custom made oil feed and return lines and fittings i bought and had made. They worked perfectly. If anyone wanted them for whatever reason i would like to get something for them.
Made: 40ish
Want: 15
CXRacing intercooler Bought this universal intercooler from CXRacing. Its 28x8x3.5 dimensions.
Bought: 149.00
Want: 100
I beleive that is everything. I am not trying to be sneaky or deceptive in anyway. I just want to try and get some of the money i spent back. All the new stuff either has 0 miles or under 100 miles on them. I dont have pictures yet, all the turbo stuff is on the car. I have spent above 2500$ on just the turbo essentials, Im not looking for that back. I just want something out of this. If you have any questions please message me. Prices are negotiable to an extent, but i think its all fair pricing. Thanks for looking!
Last edited by LobstaBisque; Jul 1, 2011 at 10:35 AM.
I made the thread before i had to go to work. My post count is low because i dont really have anything to ever add to anything anyone says. And the photos will come when i get the time to start taking pieces off and when people show interest. Ive bought things from other members on here so I am sure they can vogue a little. And I have met with people on here personally.
Sorry for the delay everyone. I have been sorta busy and completely forgot about this stuff. I have made some edits to some of the stuff, like the turbo and the oil pan. Enjoy your browsing 
Thread
Thread Starter
Forum
Replies
Last Post
